Rear Brake Calipers

[need4speed]

Does anybody know the tightening torque for the Rear Caliper retaining bolts (2x7mm Allen Bolts)?

Cheers,
Grant

[E46-M3-SMG]

States 30 - 35 Nm as I read it here (although that seems a bit odd). But have a look yourself, part 3AZ on the torque list, same as front guide bolts.

http://tis.spaghetticoder.org/s/view.pl?1/04/54/71

It also list it here as part 5AZ in with the rest of the specs for the rear caliper, again just the same.

http://tis.spaghetticoder.org/s/view.pl?2/51/53

[CraigMillwardCroft]

Does anybody know the tightening torque for the Rear Caliper retaining bolts (2x7mm Allen Bolts)?

Cheers,
Grant

Tight enough :whistle:

[conleth m3]

22lb/ft according to madrussian.net

Thats what ive used in the past

http://m3.madrussian.net/diy_rear_brake_pads.shtml

Hth

conleth

[need4speed]

Thanks lads. :thumbs:

[83SY]

I'm at Simpsons tomorrow am, will double check with them :thumbs:

[shimmy]

I'm at Simpsons tomorrow am, will double check with them :thumbs:

are you getting the front and rear turret strengthening done at the same time?

[83SY]

Don't think so just suspension fitted and general check over + new sensor as ive had no TC for the past few months