I was rained off at work today,so instead of doing paperwork and our VAT return,which I should of done,I decided to go down the road and see my mate in his garage to see if he could fit my back box purchased over the weekend from a fellow member on here.so up on the ramp she went.Fitting went well,my clamps were not in to bad condition,the bolts and nuts on the other hand were fooked and it took us a little while to cut the bolts and get them out.While my mate undid the nuts for the hangers I lowered the oem box down,it was a lot heavier than I imagined.We then started to put the rubber hangers on the new box and noticed 2 of them were split,but we used them anyway and I have ordered 3 new ones from our local dealer.So it all went a little easier than I thought and the Agency power (we think) rear box fitted well and looks the dogs bollox with the 80mm titainiam tips.I then started her up to check for any leaks around the clamps.The sound is what I wanted,not to much,but a nice snarley sound,I was also a little worried about the drone in the car,but after taking it up a duel carriage way on the way home,this also doesn't seem to bad,the worst being at about 2500-3000rpm but I can live with that as it wasn't to bad,at 6-7k revs it sounds awesome.So all in all I'm a happy bunny and can't wait for some dry weather to go out and scare some animals and old people.:smokin: pics to follow when I can work out how to do it on a iPad.:-D
-
-
Good to hear that you're happy with it Brett, remember it will get a bit louder as time goes on :supz: -
-
its OK , Bret get deafer as time goes onremember it will get a bit louder as time goes on :supz:
Comment
-
Brett,
Did it work out to be much lighter in the end then? The 'new' box was 12 kilos according to my bedroom scales. (but then I'm only 8 stone on them too :-D just kidding).
Glad you are pleased with it - I wish I'd got around to fitting it to my CSL now.....Comment
-
What was that you said?Originally posted by s.mac View Postits OK , Bret get deafer as time goes onComment
-
ill put the oem one on our scales and see what it is,I bet it's twice the weight of the new oneOriginally posted by sfh3l View Post
Comment
-
I'll save you the bother Bret ... OEM CSL back box is about 25 kg :bigcry:Originally posted by Bounce View Postill put the oem one on our scales and see what it is,I bet it's twice the weight of the new oneComment
-
What back box have you got?Comment
-
Its either Status Gruppe or Agency Power as they both look exactly the same.Originally posted by billyboysm3 View PostAttached FilesComment
-
-
Could also be a Megan Racing one as they do Agency Power copies over in the states.Originally posted by Bounce View Post
It's not a Status Gruppe as it would have their logos embossed on the tail pipes and a SG embossed on the main canister too.
How are you finding it? boomy?Comment
-
Nice one Brett! So much for not modding the CSL... :wink:Comment
-
Its a little boomy at about 2500 revs,but after that its got a nice snarly sound and yes your right the Megan racing box is also exactly the same design,but they also have their name etched on the tips,that's why I'm leaning towards Agency power,it's very well made and I'm chuffed to bits at the price i paid for it.Just need to find out how many db it's throwing outOriginally posted by phoenixcsl View Post
Comment
-
I know,I just couldn't look at those pee shooters any more.Originally posted by glendog74 View Post
Comment
-
Another view:smokin:Attached FilesComment
-
Comment