CSL Seat

[CraigMillwardCroft]

Has anybody thought about putting seat belt holes into the original CSL seats for the full harness.

[shimmy]

Has anybody thought about putting seat belt holes into the original CSL seats for the full harness.

Thorney did it a few years ago.......

[Equinox_csl]

Called Recaro SPG's think.

[gav]

Thought about it yes as have the clip in 4 point harnesses from the old m3. Can't use them in csl as nae holes in seat. Wouldn't do it of course ( resale blah blah)
Maybe need to get some recaros or punt the harnesses.

[shimmy]

Pole positions.

[gav]

Pole positions.

Yes
That's what I thought.
A mate's got some gt3 rep seats that i could buy which are pretty good and would work well.

Maybe do something in a couple of months.

[shimmy]

The CSL seats are so valuable the only sensible solution is to buy some recaros nd either ditch the rear access or buy the BMW performance seats aka e92 so they tilt, and can be bought in alacantra

[shane@mbtech]

As Shimmy says. Cutting standard seats is an idiot move IMO.

Not casting judgement on those that have done it.

[s.mac]

As Shimmy says. Cutting standard seats is an idiot move IMO.

Not casting judgement on those that have done it.

+2

no way made should this be done, in an accident you don't want your seat splitting. By something that has been tested or stick with the seat belt

[failed]

can the e92 bmw performance seat be installed in e46?

failed

The CSL seats are so valuable the only sensible solution is to buy some recaros nd either ditch the rear access or buy the BMW performance seats aka e92 so they tilt, and can be bought in alacantra

[digi]

+2

no way made should this be done, in an accident you don't want your seat splitting. By something that has been tested or stick with the seat belt

+3. Just buy some used ones if $$$ is an issue, else settle for the above solutions.