Announcement

Collapse
No announcement yet.

Ohlins Road & Track kit for the M3 E46

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pedro_rallye
    replied
    Any long term feedback of the ohlins R/T coil overs on a E46/CSL?

    Leave a comment:


  • alexk
    replied
    Originally posted by leaded View Post
    Does anyone know the standard spring rates for the CSL?
    I am pretty sure I posted it somewhere.
    Here -> https://nam3forum.com/forums/forum/c...ate-front-rear

    Leave a comment:


  • shimmy
    replied
    Have you tried an email to Sachs?

    Leave a comment:


  • O'Neill
    replied
    Originally posted by leaded View Post
    Does anyone know the standard spring rates for the CSL?
    That is the holy grail, I've searched the whole inter web and haven't found the answer.

    I think front and rear are progressive.

    Leave a comment:


  • leaded
    replied
    Does anyone know the standard spring rates for the CSL?

    Leave a comment:


  • O'Neill
    replied
    Is it a barrel spring, 110 might be the max as barrel springs are usually progressive. The separate rears with nitron were 45/80/110 progressive.

    Leave a comment:


  • _Nathan_
    replied
    Calculate it using distance from pivot point.

    I would say 110 will be ballpark 50-60 equivalent as a rough finger in air.

    Leave a comment:


  • shimmy
    replied
    Originally posted by O'Neill View Post
    Rates ratio front to rear seem to be vanilla m3, usually firmer at rear.

    Being Ohlins the damping should be good.
    Due to the position of the spring (closer to the rotation point?)???

    Leave a comment:


  • O'Neill
    replied
    Originally posted by leaded View Post
    I'm in the process of fitting the R/T kit now. Spring rates seem a bit low compared to other kits at 70nm front 110nm rear (separate spring/shock). Does anyone know how to compare the rear spring rate to one on a full coilover ie intrax @ 50 or 60nm rear?
    Rates ratio front to rear seem to be vanilla m3, usually firmer at rear.

    Being Ohlins the damping should be good.

    Leave a comment:


  • leaded
    replied
    I'm in the process of fitting the R/T kit now. Spring rates seem a bit low compared to other kits at 70nm front 110nm rear (separate spring/shock). Does anyone know how to compare the rear spring rate to one on a full coilover ie intrax @ 50 or 60nm rear?

    Leave a comment:


  • alexk
    replied
    Did anyone install the R&T kit in the end ?

    Leave a comment:


  • Brandtner
    replied
    Originally posted by mattCSLnut View Post
    Probably worth shooting a PM to "alexk" as he has OHLINS suspension fitted to his Swiss CSL :smokin:
    I believe Mr Alexk is sporting the TTX kit - will PM anyways. Thanks.

    Leave a comment:


  • taotaoali
    replied
    How are they finding them?

    Leave a comment:


  • Mike R
    replied
    Originally posted by mattCSLnut View Post
    Probably worth shooting a PM to "alexk" as he has OHLINS suspension fitted to his Swiss CSL :smokin:
    His Ohlins are nothing like the "cheap" ones mentioned in this thread.....

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by Brandtner View Post
    Anyone???
    Probably worth shooting a PM to "alexk" as he has OHLINS suspension fitted to his Swiss CSL :smokin:

    Leave a comment:

Working...
X