Announcement

Collapse
No announcement yet.

Changing steering wheel trims

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • spoonz
    replied
    On a slightly related note....

    The plastics around the heater controls and sunglasses "cupboards" are scratched and being a perfectionist I have bought a new "bottom" unit off eBay to replace. (The two cupboards)

    However, as mine is non a/c the CSL dials for heaters are quite rare. Does anyone know of a way to remove scratches from these plastics? Or is my only options a new one or a wrap?

    Leave a comment:


  • spoonz
    replied
    Originally posted by Mark CSL View Post
    It will put the light on

    Take the trims off then pop the airbag back on simples :thumbs:

    the trims don't hold the airbag and the M button wont need plugged in
    win win
    Cheers Mark, from watching YouTube of removals it looks like the trims support the airbag, but obviously not. I'll take them off this afternoon

    Leave a comment:


  • Mark CSL
    replied
    Originally posted by spoonz View Post
    Going to take mine to my local paint wizards to spray up.

    Anyone know of any reason why I couldn't run car with no airbag in for a few days while they being painted? Will the light illuminate or cause any other issues?
    It will put the light on

    Take the trims off then pop the airbag back on simples :thumbs:

    the trims don't hold the airbag and the M button wont need plugged in
    win win

    Leave a comment:


  • spoonz
    replied
    Going to take mine to my local paint wizards to spray up.

    Anyone know of any reason why I couldn't run car with no airbag in for a few days while they being painted? Will the light illuminate or cause any other issues?

    Leave a comment:


  • deanobeano
    replied
    Y and T very close together
    And like always, I was working on my other monitor whilst typing...

    Shimmy, that a PC monitor, not a library or milk monitor.

    Leave a comment:


  • s.mac
    replied
    group but coming up...
    Shimmy is always up for a bit of group but

    Leave a comment:


  • CraigMillwardCroft
    replied
    Looks a very good job :thumbs:

    Leave a comment:


  • E46CSL
    replied
    Originally posted by streightsix View Post
    You lot are big teases!

    What who where! :bigcry:

    http://www.hcandp.co.uk

    Harpenden

    Ask for Kieran
    01582 469657

    Leave a comment:


  • Mark CSL
    replied
    Originally posted by deanobeano View Post
    looks good make - care to post up the garage details?

    group but coming up...

    were you pissed whey you posted this :hahaha::hahaha::hahaha: venobeano

    Leave a comment:


  • deanobeano
    replied
    looks good make - care to post up the garage details?

    group but coming up...

    Leave a comment:


  • streightsix
    replied
    You lot are big teases!

    What who where! :bigcry:

    Leave a comment:


  • E46CSL
    replied
    Result :thumbs:

    I have used that same paint shop - very happy with the work.

    Leave a comment:


  • rstoughy
    replied
    That looks superb Shimmy.
    Next on the list for mine me thinks :smokin:

    Leave a comment:


  • Mark CSL
    replied
    too good to use now :hahaha::hahaha::hahaha:

    Leave a comment:


  • s.mac
    replied
    looks good Shimmy

    Leave a comment:

Working...
X