Front droplinks - CSL specific?

[niall1]

The front droplinks on my car are worn. The garage ordered replacements off the VIN number but when they arrived they were about an inch longer that the ones already on the car.

The existing ones look standard?

Are the droplinks CSL specific. If so does anyone have the part number?

Thanks
Niall

[alexk]

No they are not.

Are you sure you don't run aftermarket dampers ?

[Neil M]

Try these:
Part number: 31 35 6 780 847
Old Part Number: 31 35 1 095 694
Don't know if there is any difference between old and new?:whistle:

[niall1]

Are you sure you don't run aftermarket dampers ?

Yes. There's BC Coilovers that were on the car when I bought it. I also got the original suspension with the car but there was no mention of changing the droplinks and there's none in the box of original bits?

@ Neil I'll try those thanks.

[alexk]

Then 101% your drop links have been changed to shorter ones.
Can you see the part number maybe on the old parts ?
I guess they knew what the proper part from BMW is.
Unfortunately, I don't think there is a database for BMW drop link sizes.
However, this gives me an idea that I could start one.

[niall1]

They're going to pop them off tomorrow to see if there is a part number on them. I was hoping to save them a job. I'll pop the part number on here when I get it along with the length of the drop link if it helps?

[Neil M]

They all fit depending on the suspension used, OEM to extreme:

[niall1]

I think I've the second one fitted? Do you have a code for that one?
Thanks

[NZ_M3]

I think I've the second one fitted? Do you have a code for that one?
Thanks

The shorter ones are most likely to be aftermarket.

[8ARF]

Yes. There's BC Coilovers that were on the car when I bought it. .

i have bc coilovers on the compact and they did come with shorter drop links.
hope this helps (if a little late)

[niall1]

i have bc coilovers on the compact and they did come with shorter drop links.
hope this helps (if a little late)

Not too late. Thanks. :thumbs: