AP Copper washers

[rstoughy]

Does anyone have the spec of these (if they are even copper).
Have a slight weep from one of my front hoses, gave it a little tighten up but there is still something there.

really just looking for the size so I can purchase before I replace.

Cheers,

[trackm3_csl]

Give AP technical dept a call, Paul I think is the best guy, he will normally bung a couple in the post FOC

[CraigMillwardCroft]

It is copper a mate of mine when we were Racing GT40 replicars had an issue did a bit of DIY and when he went off in a big way at Mallory, on investigation of the car back at the workshop I found he had put a plain washer in so brake pipe came loose while racing, expensive mistake me thought back then.

[Graham]

Copper washers that you put either side of the braided line onto the caliper? Surely a copper washer is a copper washer :smt120 don't have to be AP specific?

[Equinox_csl]

Copper washers that you put either side of the braided line onto the caliper? Surely a copper washer is a copper washer :smt120 don't have to be AP specific?

Correct, 10mm copper washer at a guess.