Announcement

Collapse
No announcement yet.

vanos exhaust hub

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    vanos exhaust hub

    Quick question if both tabs break on the exhaust hub and the oil pump disc stops spinning will the car still start and drive?

    #2
    Yes it will, but be careful. The last one I saw had jumped a tooth on the inlet cam where a tab had gone between the chain and the cam sprocket. If this happens you will get a tell tale hole in the cam cover and a score down the side of the head. I have some pictures somewhere...

    Comment


      #3


      Comment


        #4
        Mine looked the same but the garage has got it retimed and running dint know if he's checked the vanos hub.

        Comment


          #5
          It'll run if it has jumped a tooth on the inlet cam. Not right, but it'll run.

          Comment


            #6
            The car is running nice since it was retimed it was the tensioner the failed, but I was wondering if both tabs were broken and the oil pump disc was not spinning would the car still start and drive

            Comment


              #7
              Originally posted by robm3cs View Post
              The car is running nice since it was retimed it was the tensioner the failed, but I was wondering if both tabs were broken and the oil pump disc was not spinning would the car still start and drive
              It will, but the engine management light would come on after a short while as the cam positions are monitored and they won't move as the dme asks them to.

              Comment


                #8
                Originally posted by robm3cs View Post
                The car is running nice since it was retimed it was the tensioner the failed, but I was wondering if both tabs were broken and the oil pump disc was not spinning would the car still start and drive
                It'll run, but you'll basically have no vanos

                Comment

                Working...
                X