Summer restoration has begun

[adem.csl]

Braided oil feeds

[adem.csl]

[Graham]

What's the cost of the oil cooler and the difference compared to standard?

[billyboysm3]

Nice!!!

[adem.csl]

What's the cost of the oil cooler and the difference compared to standard?

I think the cooler is about £1k
Its longer wider taller if that makes sense it fits perfect no hastle

[trackm3_csl]

I think the cooler is about £1k
Its longer wider taller if that makes sense it fits perfect no hastle

£1000 just for the cooler ! or is that with a fitting kit and hoses ?

[adem.csl]

£1000 just for the cooler ! or is that with a fitting kit and hoses ?

No it worked out about £900 and something with vat import postage the lot!!
The fittings i bought seperately they weren't cheap either

Just got back from Gareth's smg software update i got this weeks release and its make the gear shift quicker in the sense you feel more of a jolt in say s3 the one you would feel in s5 pushing it its also smoother and ive noticed it doesn't change gear whilst negotiating a corner!!
Definitely worth the trip and the team up there are super polite friendly well set up

Thank you Gareth and co!!

[CraigMillwardCroft]

No it worked out about £900 and something with vat import postage the lot!!
The fittings i bought seperately they weren't cheap either

Just got back from Gareth's smg software update i got this weeks release and its make the gear shift quicker in the sense you feel more of a jolt in say s3 the one you would feel in s5 pushing it its also smoother and ive noticed it doesn't change gear whilst negotiating a corner!!
Definitely worth the trip and the team up there are super polite friendly well set up

Thank you Gareth and co!!

How much was the upgrade :thumbs:

[adem.csl]

How much was the upgrade :thumbs:

£50 inc vat dude!!

[giraffe]

Good to hear the update has done it's job . It was good to see you mate now crack on and get those little jobs finished for Zandvoort 😃

[adem.csl]

Good to hear the update has done it's job . It was good to see you mate now crack on and get those little jobs finished for Zandvoort 😃

Unforeseen circumstances im not taking mine now im gonna drive the m3 cos i cant afford 2 ferries 2 sets of fuel and insure the mrs to drive one.

[adem.csl]

Oh shit square set up with 235/35/19 up front!!

I stretched 235/35/19 to see if it cures the tram lining!!
Will let you know when i finish

[adem.csl]

[cslsuperfan]

square set up

adem

235's on rear rims?

[adem.csl]

adem

235's on rear rims?

Drives the fuckin nuts no tramline no hard steering i got a little bit of a rough ride to start but as soon as the unused edges of the tyres had scrubbed it was super.i raised the front by 3 turns and it doesn't touch no matter how hard i push it.

To answer your question yes eagle f1 asymmetric 'no' race tyre compound.
235/35/19 stretches perfect