Best spacer set up

[Yanto_csl]

Size (f/r) and manufacturer.

Form more than function.

Best prices..

What you say fellas ?

[alexk]

H&R 12mm
12mm is the way to go and the H&R are a bit lighter than the Eibach ones.

[Clubber]

I use H&R 10mm all around. Very happy with the look with my KW CS setup.

[glendog74]

I ran 12mm Eibach all round for ages without issue.

I now run 15mm Turner front and 12mm Eibach rear.

The Turner spacers are lovely and light :smokin:

http://www.turnermotorsport.com/p-1593-bmw-5-lug-15mm-wheel-spacers-pair-most-bmws-see-applications.aspx

[mattCSLnut]

I've run H&R spacers for a good few years now :smokin:
12 mm @ the front & 10 mm @ the back. Works well with my Bilstein PSS10 & Ground Control suspension set up :thumbs:

[cslsuperfan]

Size (f/r) and manufacturer.

Form more than function.

Best prices..

What you say fellas ?

Yanto

I run H&R's

15mm fronts/12mm rears

ran 15mm on the rears for 2 years but used to get a little rubbing when pushing along

No issues since switching to 12mm on the back.

I think I paid approx. £150 for 2 pairs

[shimmy]

whatever you do keep an eye on those bolts as they will be under extra strain on your car anyway before you stick spacers on :blalalala:

[chrisburns]

15mm all round here but i actually think 12mm is prob the best set up. Interestingly I have no rubbing issues at all with 15mm unlike CSLSF there and am running PSS

[Sailorbaz]

12mm all round, no suspension changes, looks spot on.

[DazBlackCSL]

Did 12mm H&R for a while, no issues look good, then ran 15mm all round, KW (black spacer) all good also, looked better more aggressive and no rubbing with my KW kit either.

[patphnx]

12mm all round, no suspension changes, looks spot on.

What brand are you using? Any other details?

[CraigMillwardCroft]

12mm H&R all round :thumbs:

[adem.csl]

15mm all round is prob the best set up. Interestingly I have no rubbing issues at all with 15mm unlike CSLSF there and am running Kw v3 and ground control top mounts!!

Thats what i run no problem

[niall1]

15mm fronts/12mm rears

No problems with this setup and I'm running very low

http://instagram.com/p/skKeZerOv1/

[O'Neill]

15mm spacer on rear with -1.75 camber, 20mm on front -2 camber. No rubbing at 17mm lower than oem ride height.

You would be able to get away with 25mm on the front with settings above.