Could someone help me out with a link or copy of the CSL workshop manual?
I’m trying to find the table for the MAP Sensor 0-5v scale.
Thank you!
I’m trying to find the table for the MAP Sensor 0-5v scale.
Thank you!
-
-
I don't know if that info is in the workshop manual (also known as TIS in the bmw world). I do know the map sensor values though
The slope is 247.1 mbar/V or 4.047 mV/mbar. Offset is 1.1875 mbar. The software ignores sensor values below 100 mbar and above 1200 mbar.
These values are taken directly from the software -
Thank you for the information! I didn't know I needed to state the obvious.Originally posted by terraphantm View Post
Any chance you could take a screen shot of the value table? I'm looking to set up a base map for a project I'm working on...
Thank you!!Comment
-
It's just a linear sensor so the software just uses the scalars above; there is no table for the pressure and voltage. You can generate a table with some algebra if you really want.
The response curve appears to be identical to the "10-115" kpa sensors bosch sells http://www.bosch.com.au/car_parts/en...cification.pdf
(Bosch measures P1 at 0.4v and P2 at 4.65v; the CSL's sensor returns those voltages at 10 and 115 kpa in both cases)Comment
-
Has anyone had to change their map sensor up to now?Comment
Comment