Announcement

Collapse
No announcement yet.

Dead key

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by NZ_M3 View Post
    You can charge the key on an Oral B electric tooth brush ring charger. It works via induction so the same principle as your electric tooth brush.

    Just make sure it's the older style Oral B charger that's an "0" shaped base. Put the diamond side of the key in there and leave it for about half an hour. Should be as good as new.

    You can cut the key plastic open and resolder a new battery on - many available on ebay, but you will not be able to glue the key back together as before. So just buy a copied diamond blank off ebay, get it cut at a lock smith and put the newly soldered battery IC board in the new housing and glue it together. Presto, brand new key and battery.
    You learn something new every day :thumbs::hahaha:

    Comment


      #17
      Originally posted by Chad View Post
      Hi monkey just tried to initialise keys ,not worked, That has worked in the past. will try sledge hammer see if that does the job. chad🔨
      Haha Just reading over old posts , sledgehammer didn’t work ,had to buy a new key,:smokin:

      Comment


        #18
        I try to rotate keys every x3 months.

        Comment

        Working...
        X