Announcement

Collapse
No announcement yet.

Blowing fuse 46 after spoiler install

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Blowing fuse 46 after spoiler install

    Today I installed an OEM spoiler with the third brake light. I spliced the power and ground wires into the original trunk harness. Now whenever I push the brake, fuse 46 (the brake light fuse) blows. Any help is appreciated!!
    Tags: None
    #2
    Originally posted by ejendow View Post
    Today I installed an OEM spoiler with the third brake light. I spliced the power and ground wires into the original trunk harness. Now whenever I push the brake, fuse 46 (the brake light fuse) blows. Any help is appreciated!!
    There is a short in the wire you spliced. VCC (12v) is likely being short to ground, which anywhere on the chassis. Make sure there is no exposed wiring.


    Sent from my iPhone using Tapatalk

    Comment

      #3
      Originally posted by eacmen View Post

      There is a short in the wire you spliced. VCC (12v) is likely being short to ground, which anywhere on the chassis. Make sure there is no exposed wiring.


      Sent from my iPhone using Tapatalk
      Ok I will look over the wiring today, thank you

      Comment

      Previous template Next
      Working...
      X