Announcement

Collapse
No announcement yet.

What to mod next?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What to mod next?

    So far I have an intake and Dinan stage 2 software. Assuming I wanted to spend $5-700, what would you recommend? I am thinking either angel eyes with ellipsoids or something for more power. Open to any suggestions. Thanks in advance,



    Avram

    #2
    ellipsoids & pulleys?

    Comment


      #3
      M50 manifold, HFM, new software, crankpully, then maybe lights.

      Comment


        #4
        Headlights or an SSK. My two favorite upgrades from a long long list.

        Comment


          #5
          Another vote for ssk...hfm upgrade software...

          Comment


            #6
            headlights are crucial... that was the first mod i ever did.. those US lights **** deez nutz

            Comment


              #7
              Originally posted by ACDM3
              So far I have an intake and Dinan stage 2 software. Assuming I wanted to spend $5-700, what would you recommend? I am thinking either angel eyes with ellipsoids or something for more power. Open to any suggestions. Thanks in advance,



              Avram
              uprated suspension is probably the best value for money mod you can do stops the car squatting so much at rear hence faster take off!!!

              pete

              Comment


                #8
                Yeah i forgot about suspension that is prob my favorite modd but to do it right it will cost more then 700 tho. If you are willing to wait a little longer when you have more money available that is a great upgrade.

                Comment


                  #9
                  dapper.. why are u talking on here.. ur suppose to be dynoing ur car!!!!!!!!!!!!! or did u already do that ?

                  Comment


                    #10
                    Yeah haha i haven't posted my write up yet because we can't get these bmp cams installed correctly right now because they don't drop in the same way factory or shrick cams go in. and bmp is being useless in providig the spec to install so right now the car got tuned so that it will run but not to perform to its full potential. I was told that my cams right now are robbing me of power compared to factory cams thats how off they are. SO as soon as that happens i will post results. However when i ran the compression check we got 242psi across the board which was good so i will have some potential in it. But i ll tell you this much when i am cruising at 3000rpm in 1st with 3 people in the car if i give it full gas i break the rear loose or at least spin... So its pretty quick 325...

                    Comment

                    Working...
                    X