Cluch Problem....Help Please!

[m3f_95GreenDinan]

I went to start my car this morning, and I put my foot on the clutch to start the car. The clutch just pegged itself to the floorboard. I can pull it up and down with my hand, but there is no pressure. What do I do?

[m3f_RaserX]

have you checked your clutch fluid level? If its low/ empty this can happen. Otherwise you may have lost a seal in the slave clyinder or had the cline line spring a leak. Low fluid is the most obvious thing to check....

[m3f_BMWGuy206]

have you checked your clutch fluid level? If its low/ empty this can happen. Otherwise you may have lost a seal in the slave clyinder or had the cline line spring a leak. Low fluid is the most obvious thing to check....

Sounds like a bad clutch slave cylinder.

[m3f_thedood]

he said slave

[m3f_Zlatko]

Could be:


-Low clutch line fluid

-Bad clutch slave cylinder

-Bad clutch master cylinder

-Bad clutch slave to master line

[m3f_95GreenDinan]

Thanks all, I'll check it out this afternoon.

[m3f_badgtho]

Could be:



-Low clutch line fluid

-Bad clutch slave cylinder

-Bad clutch master cylinder

-Bad clutch slave to master line

precisely.



and good answer. you cannot possibly say slave for sure or anything for sure with no more information.

[m3f_95GreenDinan]

Does anyone have any info on filling and bleeding the slave cylinder. It looks like I'm going to tackle this myself for now. Pictures would be nice, but I'm asking for alot there i guess.

[m3f_badgtho]

Does anyone have any info on filling and bleeding the slave cylinder. It looks like I'm going to tackle this myself for now. Pictures would be nice, but I'm asking for alot there i guess.

you really need 2 people to do this

[m3f_M Style III]

you really need 2 people to do this

While you're at it, you may as well bleed the system...