Announcement

Collapse
No announcement yet.

car almost stalls when I engage the clutch?? Any ideas?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    car almost stalls when I engage the clutch?? Any ideas?

    I have a 97 E36 M3/4. I live in Columbus, OH (cold weather). Lately when I am driving and creeping along in traffic when I press the clutch in to coast to a stop, the tach dips to about 2-300 RPM and I get that little shutter in the car like its about to stall but it doesn't and it comes back up to 5-600.



    I have had it stall one time, but that was after I was on the gas and had it up to about 5-6k on the tach pushed in the clutch and was about to turn into a neighboorhood.



    It also idles around 500 and it's a little rough, especially in the morning. Has 90k on the clock, and has had regular maintenance, oil changes, etc. I just did the tranny oil with Redline D4ATF this past weekend.



    Any ideas on why its trying to stall out??



    Thanks for the help!

    #2
    My car will do that in the cold but not once it warms up...



    Only solution I have found is to coast down in gear until you hit 500 RPM or so, then pop the clutch in.

    Comment


      #3
      Originally posted by bmwohio
      I have a 97 E36 M3/4. I live in Columbus, OH (cold weather). Lately when I am driving and creeping along in traffic when I press the clutch in to coast to a stop, the tach dips to about 2-300 RPM and I get that little shutter in the car like its about to stall but it doesn't and it comes back up to 5-600.



      I have had it stall one time, but that was after I was on the gas and had it up to about 5-6k on the tach pushed in the clutch and was about to turn into a neighboorhood.



      It also idles around 500 and it's a little rough, especially in the morning. Has 90k on the clock, and has had regular maintenance, oil changes, etc. I just did the tranny oil with Redline D4ATF this past weekend.



      Any ideas on why its trying to stall out??



      Thanks for the help!
      check your intake boot (the one between the MAF and the throttle body). At its bottom, it sometimes tears and that that torn part of the boot causes idle issues.



      easy to replace yourself



      part number 13541740073



      number 10 here



      http://www.realoem.com/bmw/showparts...13&fg=15&hl=96



      if it ns not that (feel around with your fingers for any tears)



















      could be your Idle valve that s dirty



      I can fix that 4 you for a couple beers and a toblerone



      I just pulled mine and cleaned it

      Comment


        #4
        What did you use to clean the ICV?

        Comment


          #5
          Sounds like a vacuum leak somewhere. It could be the intake boot or just vacuum line hose getting old and falling apart. It could also be a dirty ICV

          Comment


            #6
            Originally posted by das borgen
            I can fix that 4 you for a couple beers and a toblerone...
            ...Um...wtf??

            Comment


              #7
              use throttle body cleaner. cap both ends with a rag, spray tb cleaner and slosh it around and let sit a couple minutes then pour it onto the ground. repeat as necessary and let dry/evaporate. some say lubricate it with tri-flow or equivalent after.

              Comment


                #8
                Ok, sounds good. My idle just started fluctuating between 100 and 1100 rpm

                Comment


                  #9
                  thanks everyone, I will try some of those fixes. I actually have pulled a code a couple of times for a small evap leak, so that defeintely makes sense about the tear or leak in a vacuum hose somewhere

                  Comment


                    #10
                    Originally posted by zottyzot
                    ...Um...wtf??
                    you don t like Toblerone chocolate?








                    Originally posted by Synenergy52
                    use throttle body cleaner. cap both ends with a rag, spray tb cleaner and slosh it around and let sit a couple minutes then pour it onto the ground. repeat as necessary and let dry/evaporate. some say lubricate it with tri-flow or equivalent after.
                    this is succifient and it is exactly what I did + I used a Q-tip (must use Q-tip, normal cotton swabs are shiiit) to swab away the really caked gunk

                    http://www.dvatp.com/bmw/diy/icv_ccv/

                    he doesn t clean it, he replaces it but you can simply clean. it s not worth getting a new part but if you do want

                    http://www.autohausaz.com/search/pro...er=13411744713

                    Comment


                      #11
                      Sounds good.

                      Comment


                        #12
                        Sure enough, I went out to look at the Rubber boot and it has some signs of tearing on it, on both sides. I can't figure out how to put pictures on here or else I would show you the ones from my phone. Looks like I need to change the boot and get some throttle body cleaner?? Anything else you would do while I have the boot off?

                        Comment


                          #13
                          clean the TB, ICV, and check for other vacuum leaks.

                          Comment


                            #14
                            Originally posted by das borgen
                            you don t like Toblerone chocolate?



                            toblerone the gf loves that stuff.

                            Comment


                              #15
                              Can I clean the TB or ICV with Brake cleaner or should I get actual TB cleaner?

                              Comment

                              Working...
                              X