16" E38 Basketweaves for e36 m3

[m3f_blatant]

Hey all,

Been looking for a reasonable set of rims for my e36 m3 to mount track tires to.

I have found a set of 16x8 rims off a 740i locally and was wondering if anyone has run this setup as a track setup. I believe the offset is et 23.

I am running bilstein dampers with H&R OE Springs. No camber mods front or rear, just stock alignment.



I have found a couple threads and pictures discussing the use on e36s but nothing specific to track use. I was thinking I could possibly run some 225 width track tires on them (maybe maxxis, dz2, etc). Ideally, I would like 245 width all around but the offset probably would not allow that without greater than stock camber.



Any input would be appreciated.

[m3f_Nipps]

16's typically don't clear the brake caliper. I know I've seen maybe 1 16" wheel that clears the front M3 calipers. I would recommend waiting for someone more knowledgeable to chime in before purchasing them.

[m3f_westopher]

I would also want to run larger than a 16, even if they clear the callipers, for the sake of running a lower profile (and stiffer sidewall) tire.

Wait for something that fits better. Even a set of squared DS2s can often be found cheap. 17x8.5 all around with 245s is fantastic for a semi stock suspension car.

[m3f_blatant]

Thanks guys! Good input.

Didn't think about the sidewall stiffness.

Probably would be running a 245/45/16 with them.