How do I remove the front corner light covers?

[m3f_ACDM3_ced0d57879]

My new car had clear front corners when I bought it. However, it had orange bulbs so I went out and bought whites. When I installed them, I noticed that inside the right one, there is actually a bulb cover that is orange. So now when they are on the left one is white and the right one is orange. How do I take off the corner so I can remove this bulb cover?



Thanks for any advice,



Avram

[m3f_Drifter_23d8df4bc6]

i think you open the hood up and just start taking stuff apart.

[m3f_M_PoweR_ZA]

actually, u just need a thin long screw driver

then open the hood

check next to the headlight.. there'll be a little gap - stick the screw driver down and use it to press on the clip of the corner light.. then just push it forward



difficult to explain, but if u get it right, u'll see how simple it is

[m3f_nixtfy_c9201d70ed]

The corner lights are on sliding tracks nothing really attaches them to the car they just slide in and out.

[m3f_KUpolo]

http://www.logun.org/frclears.htm

[m3f_ACDM3_ced0d57879]

Thanks for the help!!

[m3f_PurpleM3Pursuit]

i think KUpolo knows where all info is.. lol.. :thumbsup:

[m3f_KUpolo]

Originally posted by Purple99M3

i think KUpolo knows where all info is.. lol.. :thumbsup:



I try

[m3f_astan100_7ef66fbe89]

If you're just skimming directions, make sure that you are really really careful with the plastic pins!



On the clears there are these little pins that go in holes. If you just shove the thing in carelessly, you could snap off a pin and the corner then can move laterally and fly off on the highway. Not that it happened to me or anything. :roll: