New Mods....GOT PAYCHECK!

[m3f_CarQz17_da02e24fb5]

I decided to wait on a chip until i install more mods....I plan on making my own intake and installing it this weekend.



Would a crank pulley or anything else be good mod for now?? :???:



Any suggestions for HP gains would be appreciated

[m3f_imports4ever858]

seems like u need a lot of help, well here i'll help u out, don't ghetto rig your intake, buy one, Benfer CAI is only $299, if you don't want to spend that much at least buy one from ebay for under $100.. i'll tell you my mods and u can figure the rest from that.. i first got benfer intake, then stage 2 dinan software and stage 2 tranny chip, then i got the UUC TSE exhaust, then NGK iridium plugs, and just recently got

Evo Sport pulleys... out of all those mods i would say the intake and the pulleys made the biggest difference.. then after u get those u can get throttle body, high flow air meter, then cams, etc.. i wouldnt worry about a crank pulley for now, besides there is an issue on those as far as that they aren't safe or whatever, do some research on it.. hope this helps

[m3f_96M3Power_4547fc3d60]

imports4ever858, your really missing out without the m50 intake manifold. That, an intake, and a chip are the best mods you can do. The rest won't give you as big of an increase. Just taking out the baffle in your airbox and the skinny tube that sucks water from the kidney grills is a great help. The chip really adds to the fun with a higher rev limiter, and the intake manifold dominates the high end. I'd like the UUC TSE exhaust system, that will definately add to the flavor, however pullies, fan removal, and the rest are more for the rev than the run. Doing that stuff is like getting a lightened flywheel.

[m3f_imports4ever858]

i agree i did leave that out, where can i get an m50 intake manifold and how much are they, by the way are they smog legal?

[m3f_96M3Power_4547fc3d60]

look for Matutino posts. He sells them for 300, but if you miss it some company sells it for 500. Active autowerke sells the chip you can use to optimize everything... so does dinan.

[m3f_imports4ever858]

so no major company sells it? and is it smog legal in california?

[m3f_96M3Power_4547fc3d60]

I don't think its smog legal. Eurospeedperformance.com is the website of eurospeed, which sells the m50 intake manifold.

[m3f_resisTm3]

i have 1-2k more to put into my car... and im having a tough time thinking of what too... heres what im thinking so far ---



UUC Clutch Stop

UUC evo3 Short Shift kit

UUC Tranny Mounts

UUC RK Shadow Shift Knob + E-Brake



I have intake, but i am looking to replace... any ideas??



what else can i do.... what pulleys are you talking about?



and how much horsepower do you think you are putting out now imports4ever858

[m3f_imports4ever858]

short shifter would be cool, and i guess tranny mounts, im talking about evo sport pulleys. www.evosport.com i dont know how much i'm putting out but considering that intake claims 12, exhaust claims 6,7 to the wheels, software is another 10 i believe, pulleys are somewhere there too.. i want to dyno it and see.. but then again i think what those companies claim is a bunch of advertising crap.. u do feel a difference with each mod, but nothing too dramatic..

[m3f_NRG]

No ghetto mods at all. Follow the modding rules.

[m3f_SG_M3_d1201712b5]

I decided to wait on a chip until i install more mods....I plan on making my own intake and installing it this weekend.



Would a crank pulley or anything else be good mod for now?? :???:



Any suggestions for HP gains would be appreciated



Good choices. If anything, i would spend the money and buy a nice intake. ECIS makes great products.



A crank pulley is a great mod, dyno proven 10 rwhp.

[m3f_CarQz17_da02e24fb5]

Well i wouldnt ghetto rig my intake......i work for a race team in Detroit and would make it from a K&N and carbon fibre... Im sure it wouldnt turn out bad at all



Thanks for all the advice though!! ill definately use it

[m3f_1-bar]

definetly go with an Unorthodox Racing Crank Pulley... best bang for the buck. Racetec has the best price for them.

[m3f_CarQz17_da02e24fb5]

Are there any problems with the crank pulley??



Does it effect anything abnormally....and i have Huge aftermarket sound.....what about that??