Front M3 Bumper Help Needed !

[m3f_petemarsh1@hotm]

I am fitting an M3 front bumper to my standard '98 M3 and the black plastic pieces at the bottom inside on each side of the bumper are missing. Will i need to buy these to fit it or will i be able to use the standard bits ???

:help:

[m3f_Norlin]

You mean the two pieces that look like porkchops on the far left and right sides when you're looking up from under the car?

[m3f_PurpleM3Pursuit]

You mean the two pieces that look like porkchops on the far left and right sides when you're looking up from under the car?

thats what it sounds like.. i would get them to protect the underbody..

[m3f_bandpfan]

Those parts cost ten bucks or so, and tie the fender liner to the bumper so the brake ducts fit in place. I'd do it.



Jim