bmw emblem replacement

[m3f_(95_dinan_m3)]

hello my fellow bmw enthusiasts.



anyone know the easiest way to replace the bmw emblems. my original ones have a sticky backing that won't let go :banghead: . its difficult to not screw up the paint. NE1 know of a tool or any tips???



thanks...

[m3f_BMW M Powe_4a2f6c10a0]

if you are talking about the m3 badge, go to the auto parts store, and buy 3m bug and tar remover, it is safe on paint, and will remove the sticky that holds the emblem on.

[m3f_stephen]

if you are having problems pulling the badge off. you may try using fishing line. circle the badge with the line and pull the two ends together..... like cutting cheese.

[m3f_Drifter_23d8df4bc6]

you cut cheese with a line.... mmm I thought i was odd useing a knife that was too big for the job.

[m3f_Sirius_880bd69485]

The hood emblem is just snap on, just get a peice of plastic to pry it up with, careful about the paint. I belive the back is stick on

[m3f_stephen]

i was thinking of the one on the back. yes, haven't you seen cheese being cut using a line? when i go to the supermarket to buy cheese the person takes a huge block and cuts a piece using a long wire with a handle attached at the end. of course the line is not make of the same stuff as a fishing line.



strange, i thought these cutters are used the world over.



btw.... sometimes you see them in films.... being used as a weapon.

[m3f_stephen]

Drifer you are odd. Look you drive a yellow car! Then again... so do I :beer: :thumbsup:

[m3f_Tpb31_67f747186d]

if it is sticky, use a blowdryer to warm it up, then the fishingline

[m3f_95RogueM3]

YOu totally stole my name!!!!!



I have the higher post count :dance:



-Richard

[m3f_Tpb31_67f747186d]

you both wish you could be as unique as me...

[m3f_Sirius_880bd69485]

Lol...................

[m3f_(95_dinan_m3)]

thanks guyz,



step one blowdryer

step two cheese cutter



got it :spam: