Car Stalls

[m3f_96M3Power_4547fc3d60]

I'm not completely sure what is going on, but my car stalls out and won't idle after shifting out. The rpms just fall and don't stop falling.



I have the obdi manifold conversion and had it for quite some time. I had traction control and the fan removed for some time too, I put traction control and the fan back on like 3 days ago. I noticed that the hose that connects to the rubber piece between the mas and the traction control was cracking a bit. I'm hoping that is my idle problem. Or else I fear I will be putting the car completely back to stock and selling it before anything worse happens.

[m3f_96M3Power_4547fc3d60]

Ok, I found it. The tube that goes to the intake before the traction control was disconnected, must have slipped off and I don't know why.... So now the car runs fine.

[m3f_Sirius_880bd69485]

Heheh oops :P

[m3f_custom_6b7ab27928]

Interesting...less than 3 hours between the "problem" and solution. :thumbsup:

[m3f_96M3Power_4547fc3d60]

I figured I would go out and try and find the problem and if I couldn't I'd have everyone's input by the time I decided I couldn't figure it out lol. But I came back and no one replied, but it was cool because I fixed it hehe.