Announcement

Collapse
No announcement yet.

Front end difference btwn luxury and sport

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    ///sleeper,



    My '98 is missing the black mesh grill altogether. I've been trying to find the exact name & part# so I can replace it. Can you tell me where you got yours from?



    Thanks!



    oh, and while you're at it, can you also tell me where to get the lip? I agree that the front end is missing something without it.





    man, havn't been on in a while...internet is out at my house in Boulder so I'm at my folks' house in Denver catching up.



    I actually didn't use the factory mesh insert, instead I cut-to-fit a sheet of expanded aluminum and welded on four washers that fit the pegs on the bumper. Then I painted it with a few coats of of black and it turned out really nice for a whole lot less than the factory part. If you want, the factory part is sold at Bavarian Autosport for like 80-something bux. As for the front lip, part # is 51 11 2 251 767 and the screws and what not will come with it (I went through the stealer, make sure the hardwear comes with it). It was around 90-something bux. It's super easy to do and you won't regret it. Check out Understeer.com (http://www.understeer.com) for super-good directions on how to do it.

    Comment


      #17
      also when you get the lip on you should check out some Velocity splitters...they make the front end look straight menacing :fuming:

      Comment


        #18
        man, havn't been on in a while...internet is out at my house in Boulder so I'm at my folks' house in Denver catching up.



        I actually didn't use the factory mesh insert, instead I cut-to-fit a sheet of expanded aluminum and welded on four washers that fit the pegs on the bumper. Then I painted it with a few coats of of black and it turned out really nice for a whole lot less than the factory part. If you want, the factory part is sold at Bavarian Autosport for like 80-something bux. As for the front lip, part # is 51 11 2 251 767 and the screws and what not will come with it (I went through the stealer, make sure the hardwear comes with it). It was around 90-something bux. It's super easy to do and you won't regret it. Check out Understeer.com (http://www.understeer.com) for super-good directions on how to do it.



        Uhhh? got a pic of that?

        Comment


          #19
          yup...mind you I had just driven home from school in a $hit-storm so my car isn't the cleanest right here, I just put on my splitters so I wanted a pic. Also, to correct what I previously stated, I used expanded steel, not aluminum. I couldn't find aluminum, but if I did it again, I'd look harder. CO puts lots of sand on their roads in the winter so painted front pieces don't last long w/out redoing them and the chips in the steel rust. (pretty much, I'd recomend buying the factory piece, I'm doing that too b/c I'm too lazy to re-paint the mesh).http://www.m3forum.net/gallery/data/522/19074P5140049shrunk.JPG Sorry, the mesh is kinda hard to see too...

          Comment


            #20
            Ahh I get it. Looks good. I like the splitters too! :thumbsup:

            Comment


              #21
              man, havn't been on in a while...internet is out at my house in Boulder so I'm at my folks' house in Denver catching up.



              I actually didn't use the factory mesh insert, instead I cut-to-fit a sheet of expanded aluminum and welded on four washers that fit the pegs on the bumper. Then I painted it with a few coats of of black and it turned out really nice for a whole lot less than the factory part. If you want, the factory part is sold at Bavarian Autosport for like 80-something bux. As for the front lip, part # is 51 11 2 251 767 and the screws and what not will come with it (I went through the stealer, make sure the hardwear comes with it). It was around 90-something bux. It's super easy to do and you won't regret it. Check out Understeer.com (http://www.understeer.com) for super-good directions on how to do it.



              Thanks ///sleeper! I'm pretty mechanically inclined so I'm gonna try doing the mesh myself (only if I can find aluminum or stainless steel). I'll also be ordering the lip spoiler now that I have the part#.



              Thanks again!

              Comment


                #22
                I was under the impression that the front lip was only for 97+ no matter what, luxury or not. I was also told that the front lip I bought would sag or even crack the bumper over time if I tried to put it on my 95 because 97+ bumpers have actual screw points built in to them.



                How long anyone had theirs on for and how's it holding up?

                Comment


                  #23
                  I was under the impression that the front lip was only for 97+ no matter what, luxury or not. I was also told that the front lip I bought would sag or even crack the bumper over time if I tried to put it on my 95 because 97+ bumpers have actual screw points built in to them.



                  How long anyone had theirs on for and how's it holding up?



                  96 M3 had it. 95's that are non lux had it. Get your facts straight.

                  Comment


                    #24
                    96 M3 had it. 95's that are non lux had it. Get your facts straight.





                    That was what I was told. So I was wrong about the first part. No need to be an a$$ about it!

                    Comment


                      #25
                      Check my sig.



                      I'm with my man Sirius -- I went with slats recently, when insurance bought me a new front spoiler. I too like a more unique car, esp. with the Hellas, clears, Silverstar fogs and blue white turns. You'll know it's me if I'm coming up on you!



                      Mesh/slats are a straight swap I think. You'll note I went black, and Sirius went body color, Hellrot.



                      I think I remember OEM price for lip is way expensive.

                      Anyone with a front plate on their M3 should not be allowed to give style advice.

                      Comment


                        #26
                        Anyone with a front plate on their M3 should not be allowed to give style advice.



                        Heh. Why do you snap back at everyone on here so often?

                        Comment


                          #27
                          just general sarcasm.

                          Comment


                            #28
                            Anyone with a front plate on their M3 should not be allowed to give style advice.



                            Glad you finally took a shot at me, like you have to so many others with your negative, critical posts. So I can respond. Take a look -- almost every single post of yours is negative, critical, and unhelpful.



                            Why don't you go kick your dog, or whatever else you do, instead of posting next time and spare us your "sarcasm"? Stay on bimmerforums if you're just into taking shots at people.

                            Comment


                              #29
                              Glad you finally took a shot at me, like you have to so many others with your negative, critical posts. So I can respond. Take a look -- almost every single post of yours is negative, critical, and unhelpful.



                              Why don't you go kick your dog, or whatever else you do, instead of posting next time and spare us your "sarcasm"? Stay on bimmerforums if you're just into taking shots at people.

                              Sarcastic yes.



                              Unhelpful, not hardly.

                              Comment


                                #30
                                Some states do REQUIRE a front plate man...I have one. I hate it and all, but I'd rather have it then deal with a lame fix it ticket and have to sit through a day in court just to prove I attached a front license to my car.

                                Comment

                                Working...
                                X