Power window help?

[m3f_CosmosNight]

:help: I recently put new power window motor on my drivers side. It was working fine then a few days later it started making a noise like it didnt know when to stop when I rolled it up. Then I rolled my window down and it wouldnt roll up. I drilled out the rivets and let the motor spin freely. It was hardly working and got pretty hot. I called the company where I got it and told them what happened so they gave me a new motor and took the old one.

So we put that motor in it seemed to work fine for the first day until later that night I couldnt roll my window down again. So the next day took it out and let it run without being connected it seemed to run fine so we put it back in then it stopped again did this three times we finally got it to work fine and when I tried to roll it down the next morning it wouldnt budge. But later that day I pressed the button again and it went down some but I rolled it up immedietly cause didnt want to chance it staying down and it made that noise again like it doesnt know when to stop.I changed the button so it is not that. I will been driving with my window up until I can find out what is wrong. If this has ever happened to you are know what I need to do to fix it please please help me out. eace:



Thanks

Aaron

[m3f_Sirius_880bd69485]

When the window goes up, does it seem like its going slower than normal?

[m3f_CosmosNight]

No it seems to move fine when it moves

[m3f_m3fuz_1da011f372]

Could be the sliders. www.understeer.com has a fix for this under his "Tech Write Up" section. I would check that out and see if that fits the bill.