Announcement

Collapse
No announcement yet.

Help on installing AA Gen3 Exhaust...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help on installing AA Gen3 Exhaust...

    Hey guys, Im trying to install my AA exhaust and Im having a diffucult time.

    I cant seem to get the hangers to line up so I can bolt it up to the car.

    When I tried to boltup the pipes first to the cat, I cant bolt up the hangers....

    And when I tried to bolt up the hangers first then the pipes to the cat, it's too short!... (about 1.5 - 2 inch short)



    I tried following the directions it came with..

    also tried switching the hangers if maybe I put them on wrong....

    I just dont know what to do anymore... sorry guys... im just a little frustrated..

    I know this exhaust fits my car so im definitely doing something wrong...

    So here's a pic of my hangers (from stock exhaust)...and please tell me I I need different ones...

    Thanks!

    http://www.m3forum.net/gallery/data/501/11615Picture125-thumb.jpg

    #2
    My stock hangers were crap when I took off my stock cat-back and started to install my AA Gen3 cat-back. I just ended up taking it to an exhaust shop and having them make some new hangers and install it for me.

    Comment


      #3
      my stock hangers look fine, but I am thinking of going to a shop for new hangers....



      MPOWR95...How did those hangers work out for you? it didnt give you problems..did it?...cause im probably going to end up doing that..

      Comment


        #4
        I haven't had any problems with it. I'll be putting my car back to stock most likely since I'm selling it and I think I'd get more for it if I sold the parts seperately. The exhaust shop should be able to do a good job. Just a heads up...when you first put on your exhaust its going to be EXTREMELY QUIET! Don't get discouraged. It will also stink really bad while the metal is breaking in. After I would say about 4 days or so you'll start to hear the exhaust more and the stink will go away. When I first put the exhaust on I was sooo depressed because I thought it was as loud as it was going to get. but after a while you'll find that it sounds really good, not too loud, not too quiet. Good luck!

        Comment


          #5
          hey guys... i just spoke to one of the people at AA and they told me that one of my hangers belong to a 325....(the one on the left)

          I was wondering why they were'nt indentical to each other.

          I'll have to buy a new one now which i was told cost around $40.

          I just have this fixes my problem......

          Comment

          Working...
          X