Picture request: 18" BBS CH rims on a Dark Blue E36 Coupe

[m3f_Klint_c491bc5f79]

Not fussed if it's photochopped or not, just wanting to get an idea of what it'll look like.



Better yet - anyone actually have the 18x8.5" BBS CH rims? Any kind of rubbing issues with 225/35 18 rubber. :antismili



Anyone tried the Yokohama Parada Spec 2 rubber too?

[m3f_Drifter_23d8df4bc6]

the 225 would have no problems on a M3, you could even get up to 255 in back if you wanted. Even in front you could run 235 or 245.

[m3f_Sirius_880bd69485]

I dunno what the ofset was, but my last set of rims ran 225/40/18.



Just barely enough clearance on the quarters though, but I think thoes RD's had a bizzar offset to them.

[m3f_Klint_c491bc5f79]

Cheers folks!



Anyone care to photoshop a pic?

[m3f_park828_94ead836d3]

sirius... your lightweights look awesome... maybe i should look up on a set..

[m3f_dapper83_ac01dd8204]

my bbs are 38mm offset pretty sure the same as those im running 2254018 with no rubbing issue and the car is lowered...

[m3f_Klint_c491bc5f79]

my bbs are 38mm offset pretty sure the same as those im running 2254018 with no rubbing issue and the car is lowered...

Cheers Dapper, I think i'll take the plunge in getting the 18" BBS CH rims...

[m3f_The Fly_6a68e922d2]

I have the 18x8.5 CH's and they fit fine with my 245/35 Pzero Rosso's. My rear fenders have been rolled though.









Not fussed if it's photochopped or not, just wanting to get an idea of what it'll look like.



Better yet - anyone actually have the 18x8.5" BBS CH rims? Any kind of rubbing issues with 225/35 18 rubber. :antismili



Anyone tried the Yokohama Parada Spec 2 rubber too?