Announcement

Collapse
No announcement yet.

Shifting problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Shifting problem

    Wuz up guys? I'm new here. Had my 95 m3 for 2 years. My problem started 'bout 2 weeks ago I was driving hard and all of a sudden I couln't get into any gear, my clutch was dead. Waited a few minutes and it started working normally. Its been working but when I switch gears I feel a delay and my car bogs a little. especially from 1st to 2nd. what could it be? my clutch or what??



    when I bought the car 2 years ago the dealer told me they just replaced the clutch. so its only been only 25,000 miles on it.

    #2
    It could be master cylinder

    Comment


      #3
      Try bleeding your clutch system. While you're under there, check for leaks. I would say either the master cylinder or the slave cylinder is going bad, if you have no leaks and the system has been bled properly.

      Comment


        #4
        I wish I could do it myself but I don't have the tools or place to do it. So I'll just live w/it until I can take it to the shop. I'll let u know what they quote me.

        thanks

        Comment

        Working...
        X