What The Best Suspension For my E36

[m3f_SaikoE36]

HI guys I just bought a 1996 e36 and was wondering what type of Suspension Should i get?? What would be best for my car...Drag/Cayon RUnning type. Please let me know :wave:

[m3f_SG_M3_d1201712b5]

Drag/Cayon RUnning type



:rofl2:

[m3f_salty_80d4b8491b]

HI guys I just bought a 1996 e36 and was wondering what type of Suspension Should i get?? What would be best for my car...Drag/Cayon RUnning type. Please let me know :wave:

Drag cars usually want no front shocks from what I heard. Canyon racers want pretty taught ones. If you want a decent street ride, stock but refreshed is pretty good. If you want lower, you have a number of choices. Racers seem to like ground control suspension packages. Konis seem to get the nod over most other shocks. Eibach and H&R are two big names in springs. Other prominent suspension tuners are Dinan, Turner Motorsports, and a host of others. Good luck.

[m3f_m3izzle]

ground control

[m3f_SaikoE36]

Drag cars usually want no front shocks from what I heard. Canyon racers want pretty taught ones. If you want a decent street ride, stock but refreshed is pretty good. If you want lower, you have a number of choices. Racers seem to like ground control suspension packages. Konis seem to get the nod over most other shocks. Eibach and H&R are two big names in springs. Other prominent suspension tuners are Dinan, Turner Motorsports, and a host of others. Good luck.



thanks man... :thumbsup:

[m3f_SaikoE36]

Ive been looking at the other forums and ive been seeing the koni s/a with H&R racing springs?? Does anyone else recommend these? How about those fully adjustable koni's for 1500?

[m3f_SaikoE36]

ground control



Wuts ground control??? Havent seen or heard or those?? Be more specific please?

[m3f_Lunnzz]

What about the Bilstein PSS9 coilovers does anybody have any comments on them??

[m3f_Dan Law_37ceb89e11]

I'll take care of you if you want Ground Controls.



The ONLY other kit I would recommend is TC Kline.



EMail my business if interested.

[m3f_NorCal///M_92f10ae09a]

i have dinan stage II and am very pleased. consists primarily of bilstein shocks w/ dinan springs, upgraded front and rear sway bars, upper tower bars, camber plates. the ride is smooth and responsive. definitely look into replacing / upgrading the rear trailing arm bushings and rear shock mounts no matter what brand you go with.

[m3f_Excidium28]

H&R springs are fine if you go with sport (1.5" on the front) if you want it lower than that like 2" drop on the front (H&R race) i would go with something elce than H&R because you will never be able to align the front.

[m3f_SaikoE36]

I think im going to go with H&R Racing with Koni S/a....Thanks everyone...If any more comments please let me know i might change my mind about that set up...

[m3f_M-avant_0baeb1c2f5]

that should work just fine

[m3f_mania]

i was going to use hot bits coil overs has anyone heard of them they are external damper and height adj.

[m3f_JB///M3]

H&R springs are fine if you go with sport (1.5" on the front) if you want it lower than that like 2" drop on the front (H&R race) i would go with something elce than H&R because you will never be able to align the front.





my front end is straight as a arrow... care to describe how springs would cause your front alignment to be off always? sounds like u don't have a good place to go in your town