MSS60 241E Full

[KClemente]

Hi, does anyone have a 241E full read?

If not, what is the best way for me to update my 080E to 241E without locking the injection processor?

[ppm008]

Why do You believe to lock injection by updating from 080E to 241E ?
Do you have DCT ?
If yes, you should update DCT too.
If not, you dont need 241E.
You can stay on 080E or even better 090E/130E
Later changes effect mostly US OBD and DCT

[KClemente]

Why do You believe to lock injection by updating from 080E to 241E ?
Do you have DCT ?
If yes, you should update DCT too.
If not, you dont need 241E.
You can stay on 080E or even better 090E/130E
Later changes effect mostly US OBD and DCT

I thought I once read that updating the dme may lock it.

Truthfully I do not need to update, but I am compiling an XDF and it would be nice to be on the latest software version as 241E seems to be the most common.

[Tomba]

I always update ECUs to the latest 241E. XDF can be applied to all versions with 241E program. Downside is indeed BDM lock. For cloning/2nd ECUs there is an alternative way to read the ISN and set it in the CAS. Always a "back-up" solution.