MSS60 XDF Mappings

[MAXGEE]

Hello,
Thats my first post so greetings from Germany

Just a quick question. What Parameters do I have to Change to get very Slight Pop and Bangs or more of a crackle in only m Mode?

I have enough knowledge with win ols. Just asking for a small manual or a list.

some negative timing in decel areas. What are you using to upload files?

[Acevin1]

Hello,
Thats my first post so greetings from Germany

Just a quick question. What Parameters do I have to Change to get very Slight Pop and Bangs or more of a crackle in only m Mode?

I have enough knowledge with win ols. Just asking for a small manual or a list.

[Beniki]

https://github.com/MotorMouth93/BMW-XDFs/blob/master/Damos%20and%20A2L%20dumps/BMW%20M3%20-%20SIEMENS%20MSS60.zip

This might be useful

[S65_Power]

also complete inj and ign a2l

http://s000.tinyupload.com/index.php...08348244175672

Can somebody reupload A2L pack? I want to tune Schrick 292 cams.

[Dash1]

Interested in contributing to the xdf, what tools are you all using? WinOLS? TunerPro?

[Tomba]

Thanks for sharing!

Has anyone tried this and can confirm this works to remove the top speed limiter?

these are the maps for speed limiting, so yes. changing them will work.

[kaiv]

Hello I've merge some info in a text file so I put them here.

241E guide


V-max map:

0xB090-0xB137
Full bin offset +7000

5x 8x2map, [08 00] separator

Stock:
00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07
11 60 11 60 11 60 11 60 11 60 11 60 11 60 11 60
last:
00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07
0F C0 0F C0 0F C0 0F C0 0F C0 0F C0 0F C0 0F C0

Full speed:
00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07
1F 40 1F 40 1F 40 1F 40 1F 40 1F 40 1F 40 1F 40
all

Thanks for sharing!

Has anyone tried this and can confirm this works to remove the top speed limiter?

[qze]

Try this one

hi

it worked like a charm!

thank you so much for your help!

[Tomba]

Try this one

[qze]

upload your tune (128kb) file as well. Once you have done RSA bypass you don't need to write the full file again.

thank you for your advice.

[Tomba]

upload your tune (128kb) file as well. Once you have done RSA bypass you don't need to write the full file again.

[qze]

Never had problems like you described.


Yes, there is also a cold map for warming up. They should all be placed close to each other.

Upload your file and I can have a look.

hi.

i attached with mine.
since when i put 8500 to KL_N_BEGR_TMOT_HEISS causes crash. so this binary leaves KL_N_BEGR_TMOT_HEISS 8300.

also i'm editing binary with this xdf file.

https://github.com/wilhellmina/MSS60_XDF

thanks.

[Tomba]

my target is 8500rev, so i did put 8500 to these parameters but when i put 8500 to KL_N_BEGR_TMOT_HEISS engine stalls with warning light on.

Never had problems like you described.

i'm assuming that there is KL_N_BEGR_TMOT_KALT or something?

do you guys have any idea to solve this?

thanks.

Yes, there is also a cold map for warming up. They should all be placed close to each other.

Upload your file and I can have a look.

[qze]

Here are some other rpm limiters I found :

Martyn I noticed that your bin modification tool only lists the "hot" oil rpm limiters, maybe you could add the cold one too !

hi.
i think i've found those rev limit parameters.


my target is 8500rev, so i did put 8500 to these parameters but when i put 8500 to KL_N_BEGR_TMOT_HEISS engine stalls with warning light on.
i'm assuming that there is KL_N_BEGR_TMOT_KALT or something?

do you guys have any idea to solve this?

thanks.

[Nick_E92]

Any update? im looking for an XDF right now and this is best thread