CSL breather tube

[Thoglan]

would you do the same karb/haimus setup again or karb snorkel?


Sent from my iPhone using Tapatalk

Yep 100%, I much prefer the look and it's still a decent chunk cheaper.

To be clear the actual construction of the snorkel is quite good, mine just had a few imperfections in the surface finish since the paint on it is very soft. Eventually I'll repaint it and I'll be 100% satisfied.

[jylee05]

would you do the same karb/haimus setup again or karb snorkel?


Sent from my iPhone using Tapatalk

[Thoglan]

wow! 110% effort.

I am debating canceling the karb snorkel and getting the haimus snorkel just because it looks more OEM. not sure i can cough up $1700-2000 more for OEM snorkel/flap


Sent from my iPhone using Tapatalk

That is what I did since I was after the more OE look of the matte black plastic. Did a small write up here since it wasn't confirmed anywhere that they fit up together.

https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/178646-recent-karbonius-orders/page3#post201363

They fit up like they're designed for eachother, but the Haimus snorkel is definitely not Karb level quality, the finish is a bit meh and you'll need to source OEM bolts since the supplied hardware doesn't work with the Karb.

[jylee05]

wow! 110% effort.

I am debating canceling the karb snorkel and getting the haimus snorkel just because it looks more OEM. not sure i can cough up $1700-2000 more for OEM snorkel/flap


Sent from my iPhone using Tapatalk

[Cubieman]

is your snorkel oem or haimus? just saw on IG and looks good


Sent from my iPhone using Tapatalk

The snorkel is OEM, I wanted the ability to run the flap, mainly just because it thought it was cool and something to do as well

[jylee05]

Makes sense, thanks for the advice!


Sent from my iPhone using Tapatalk

is your snorkel oem or haimus? just saw on IG and looks good


Sent from my iPhone using Tapatalk

[jylee05]

Makes sense, thanks for the advice!


Sent from my iPhone using Tapatalk

[Cubieman]

Thanks, what do folks do with the electronic valve sensor that plugged into the stock vent hose? Not sure where to tuck that away if I don't want to completely unhook it from the ECU

You can zip tie it under the cowl area where you can't see it.

[jylee05]

May need to plug the opening on the air rail. That's it.

Thanks, what do folks do with the electronic valve sensor that plugged into the stock vent hose? Not sure where to tuck that away if I don't want to completely unhook it from the ECU

[bigjae46]

May need to plug the opening on the air rail. That's it.

[jylee05]

Gonna open this one back up. I’ve been running the OE configuration on my ‘06. Did we ever figure out if this would cause issues. CSL software. This has been killing me for a while because every time I look at it, I wonder if I have it all wrong…

Hi - I know this thread has gone quiet, but wondering what is best practice here. I have a 2005 and will start with modified CSL software (Terra). If I simply use the OEM CSL vent hose, should I be doing anything else here?

[Casa de Mesa]

The two connectors (NORMA brand) that are at each end of the tube.

Thanks, was being a tad coy with my question... 😁

[Slideways]

Wait which part do you keep?

The two connectors (NORMA brand) that are at each end of the tube.

[Casa de Mesa]

Cut off the plastic hose, keep the ends, find a hose that's the right size and use hose clamp.

Wait which part do you keep?

[Sharocks]

Cut off the plastic hose, keep the ends, find a hose that's the right size and use hose clamps.

Really easy.

Also, lol paying for this part.