Update on OE CSL Wheels GB from M3F???

[rich.7]

Hi guys,

Saw this on the net, supplier based in Germany, hope this helps the peeps that are stuck with rears and keen on CSL fronts

Can anyone confirm if they purchased wheels from this retailer? They offered PayPal payment so I'm sure several have purchased. Would like to know if their wheels came in and what the status is.

[HitmanM3]

The link from M3Giovan are indeed the stems I'm using. I also found that Testors Diamond Dust spray paint is a very close color match for painting the valve caps.

[M3Giovan]

thanks for the info. This is what I found 👇🏽

https://www.napaonline.com/en/search...&se=1&txtUser=

[0-60motorsports]

I've been using valve stems from Napa without issue. Look at my post #55 on page 4.

Even though they are expensive i like them, would love to get a set of four but its been hard to find a place online. Would you happen to have a link for them?

I found them on ebay but they only have two:

https://www.ebay.com/itm/Remote-Tire-Pressure-Monitor-Sensor-Valve-Assembly-RWD-NAPA-ECHLIN-PARTS-ECH/274681545293?epid=1729844094&hash=item3ff44bc24d:g:mf8AAOSwiQ9ZSDvF

[M3Ollie]

I use the Napa ones too they look great without any modification needed almost perfect color match.

[HitmanM3]

I've been using valve stems from Napa without issue. Look at my post #55 on page 4.

[M3Giovan]

So what’s everyone doing for valve stems?

following

[DropTopKingM3]

Any chance they do another group buy this year???

I highly doubt it.. The current stock is pretty scarce as it is and they haven't fulfilled all of the orders from the last group buy.

[Mattn1192]

Any chance they do another group buy this year???

[bassel_sy]

If anyone changes their mind on the wheels PM me

[Skaper]

So what’s everyone doing for valve stems?

[joshuatrueanderson]

What up everyone. Rave426 from the original M3Forum. I missed this group buy. Does anyone have an extra set of CSL front wheels they'd like to sell. Send me and email - [email protected]

lol ok Ill jump on this too...(with zero % hopes)


anyone in the world have genuine front CSL email me [email protected]

[RTGM3]

I received the rear ZCP/CSL wheels, test fit them with some washers & studs and then ordered 12.5mm spacers and extended bolts from ECS (they came together as a kit).

I haven't driven on them so I can't say if they rub or not. Tire size is 265/30/19 on Eibach Pro springs & tire is about flush with the fender.




Sent from my SM-G960U using Tapatalk

[mainstreamer00]

Hey looking for advice...
looking for spacers and extended lug nut recommendations
while waiting for my set to arrive (ZCP/CSL)
Thanks!!!!!

I've always just run Apex for both - no issues.

[M3Giovan]

Hey looking for advice...
looking for spacers and extended lug nut recommendations
while waiting for my set to arrive (ZCP/CSL)
Thanks!!!!!