Announcement

Collapse
No announcement yet.

Update on OE CSL Wheels GB from M3F???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rich.7
    replied
    Originally posted by GeorgeBeirut View Post
    Hi guys,

    Saw this on the net, supplier based in Germany, hope this helps the peeps that are stuck with rears and keen on CSL fronts


    Click image for larger version

Name:	IMG_4429.jpg
Views:	828
Size:	71.6 KB
ID:	83858
    Can anyone confirm if they purchased wheels from this retailer? They offered PayPal payment so I'm sure several have purchased. Would like to know if their wheels came in and what the status is.

    Leave a comment:


  • HitmanM3
    replied
    The link from M3Giovan are indeed the stems I'm using. I also found that Testors Diamond Dust spray paint is a very close color match for painting the valve caps.

    Leave a comment:


  • M3Giovan
    replied
    thanks for the info. This is what I found 👇🏽

    https://www.napaonline.com/en/search...&se=1&txtUser=

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by HitmanM3 View Post
    I've been using valve stems from Napa without issue. Look at my post #55 on page 4.
    Even though they are expensive i like them, would love to get a set of four but its been hard to find a place online. Would you happen to have a link for them?

    I found them on ebay but they only have two:

    Leave a comment:


  • M3Ollie
    replied
    I use the Napa ones too they look great without any modification needed almost perfect color match.

    Leave a comment:


  • HitmanM3
    replied
    I've been using valve stems from Napa without issue. Look at my post #55 on page 4.

    Leave a comment:


  • M3Giovan
    replied
    Originally posted by Skaper View Post
    So what’s everyone doing for valve stems?
    following

    Leave a comment:


  • DropTopKingM3
    replied
    Originally posted by Mattn1192 View Post
    Any chance they do another group buy this year???
    I highly doubt it.. The current stock is pretty scarce as it is and they haven't fulfilled all of the orders from the last group buy.

    Leave a comment:


  • Mattn1192
    replied
    Any chance they do another group buy this year???

    Leave a comment:


  • bassel_sy
    replied
    If anyone changes their mind on the wheels PM me

    Leave a comment:


  • Skaper
    replied
    So what’s everyone doing for valve stems?

    Leave a comment:


  • joshuatrueanderson
    replied
    Originally posted by rave426 View Post
    What up everyone. Rave426 from the original M3Forum. I missed this group buy. Does anyone have an extra set of CSL front wheels they'd like to sell. Send me and email - [email protected]


    lol ok Ill jump on this too...(with zero % hopes)


    anyone in the world have genuine front CSL email me [email protected]

    Leave a comment:


  • RTGM3
    replied
    I received the rear ZCP/CSL wheels, test fit them with some washers & studs and then ordered 12.5mm spacers and extended bolts from ECS (they came together as a kit).

    I haven't driven on them so I can't say if they rub or not. Tire size is 265/30/19 on Eibach Pro springs & tire is about flush with the fender.




    Sent from my SM-G960U using Tapatalk



    Last edited by RTGM3; 03-18-2021, 09:57 AM.

    Leave a comment:


  • mainstreamer00
    replied
    Originally posted by M3Giovan View Post
    Hey looking for advice...
    looking for spacers and extended lug nut recommendations
    while waiting for my set to arrive (ZCP/CSL)
    Thanks!!!!!
    I've always just run Apex for both - no issues.

    Leave a comment:


  • M3Giovan
    replied
    Hey looking for advice...
    looking for spacers and extended lug nut recommendations
    while waiting for my set to arrive (ZCP/CSL)
    Thanks!!!!!

    Leave a comment:

Working...
X