Announcement

Collapse
No announcement yet.

VMR V703 vs OE ZCP wheel differences?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • z_enthusiast
    replied
    I have the same Z4M red you show in the pics. Mine is 2007. Looking at moving forward the the V703s. You note the size but what offsets are those wheels. When going this size, the ZCPs are 47 in the front and 27 in the rear.

    Leave a comment:


  • 02_lsb
    replied
    Originally posted by WestBankM4 View Post

    I'm assuming you went with CH-R 19's? What was the size you went with in front, 9.5"?
    R. 8.5” front, mostly due to spacers required to run 996 brembos.

    Leave a comment:


  • Maxima SE
    replied


    19x9.5 and 19x10 both in + 22.



    Click image for larger version

Name:	4587554010_92c74b85b3_o.jpg
Views:	1567
Size:	150.7 KB
ID:	207625
    Attached Files

    Leave a comment:


  • Tbonem3
    replied
    Originally posted by Maxima SE View Post

    Mine are 9.5 +22. I wonder if that offset is more concave than +40.
    Yes, the 40 offset is non M, and would be less concave. One of the (few) benefits of reps over factory wheels is better offsets.

    Leave a comment:


  • WestBankM4
    replied
    Originally posted by 02_lsb View Post

    yup. I started out with these same VMRs and realized I too wanted a set of CH wheels. They come in two flavors - S and R; so I wanted the Rs. They are 10.5” rear. Picked up a set and had them refinished, I am very happy with them. I do not believe BBS makes that exact spec anymore. Keep an eye out, they’re out there.
    I'm assuming you went with CH-R 19's? What was the size you went with in front, 9.5"?

    Leave a comment:


  • Maxima SE
    replied
    Originally posted by sda2 View Post
    VMR703 on the left and CSL on the right.

    VMR are 9.5 -40 offset and CSL are oem 9.5 -27
    Mine are 9.5 +22. I wonder if that offset is more concave than +40.

    Leave a comment:


  • 02_lsb
    replied
    Originally posted by WestBankM4 View Post
    They're nice wheels, I bought them from a forum member here who went with 18's. I agree that they are super heavy in cast form and 19's are harsh especially living in the Bay Area. The VMR's I have are an exact replica size of the CSL's front and back, 8.5" fronts and 9.5" rears. They look fantastic, but I'm on a hunt for BBS CH's, I just love those wheels.
    yup. I started out with these same VMRs and realized I too wanted a set of CH wheels. They come in two flavors - S and R; so I wanted the Rs. They are 10.5” rear. Picked up a set and had them refinished, I am very happy with them. I do not believe BBS makes that exact spec anymore. Keep an eye out, they’re out there.

    Leave a comment:


  • sda2
    replied
    VMR703 on the left and CSL on the right.

    VMR are 9.5 -40 offset and CSL are oem 9.5 -27
    Attached Files

    Leave a comment:


  • WestBankM4
    replied
    They're nice wheels, I bought them from a forum member here who went with 18's. I agree that they are super heavy in cast form and 19's are harsh especially living in the Bay Area. The VMR's I have are an exact replica size of the CSL's front and back, 8.5" fronts and 9.5" rears. They look fantastic, but I'm on a hunt for BBS CH's, I just love those wheels.

    Leave a comment:


  • Maxima SE
    replied
    Originally posted by Tbonem3 View Post
    Def a good looking rep. Perhaps they made changes, because they used to be quite obviously a rep - spoke too thin was the dead giveaway, and the finish, understandably, was not as premium as the BMW paint.

    They were cast and thus, heavy. Maybe they're flow formed now (like ag m359s), and had a redesign?
    Yeah they are not too bad. For $900 shipped black Friday sale I can’t complaint. I am not sure how they are made but the finish is not the best. There are a couple areas where the clear coat was a little runny and few dust particles below the paint. Also the lug holes are poorly painted. Overall it’s stuff you notice up close. I may get the black ones for the E46 since these are close enough. The AG M359 on the other hand are an exact replica. Side by side they look exactly the same !

    Leave a comment:


  • Tbonem3
    replied
    Def a good looking rep. Perhaps they made changes, because they used to be quite obviously a rep - spoke too thin was the dead giveaway, and the finish, understandably, was not as premium as the BMW paint.

    They were cast and thus, heavy. Maybe they're flow formed now (like ag m359s), and had a redesign?

    Leave a comment:


  • Maxima SE
    replied
    Ended up installing them on My Z4M that I just lowered on Bilstein B12 pro kit. For anyone that is thinking about buying these wheels, here is how they look ! The rears may not be as concave but the setup still looks very beautiful. I am very happy with the results. My rears are 19x9.5". Perhaps the 19x10 is just as concave as OE ZCP.

    Click image for larger version

Name:	7.jpg
Views:	1650
Size:	275.9 KB
ID:	207517

    Click image for larger version

Name:	9.jpg
Views:	1641
Size:	74.5 KB
ID:	207515

    Click image for larger version

Name:	6.jpg
Views:	1654
Size:	145.0 KB
ID:	207516
    Attached Files

    Leave a comment:


  • MarcZCP
    replied
    About 10mm
    ​Click image for larger version

Name:	image.png
Views:	1706
Size:	795.3 KB
ID:	206222​

    I also took this picture, from a similar angle to one from your original post, for comparison

    Click image for larger version

Name:	image.png
Views:	1695
Size:	637.1 KB
ID:	206223​

    Leave a comment:


  • Maxima SE
    replied
    Originally posted by MarcZCP View Post
    My ZCP wheels are off the car for winter storage, so was able to do this measurement on the rear wheels. Looks like ZCP are deeper, I measure 71mm. The straight edge was resting on the tire, but that's only about 1-2mm off from the wheel edge so actual distance is going to be right around 70
    Thank you. Do you know how height the lip for the center cap is? on the V703 they're about 8mm tall. I went and re-measured the concavity again and its definitely under 60mm and no where near 70 mm if measured from the surface of the tire (275/30 PS4). Perhaps the 19x10 may be as deep as the OE wheels

    Leave a comment:


  • MarcZCP
    replied
    My ZCP wheels are off the car for winter storage, so was able to do this measurement on the rear wheels. Looks like ZCP are deeper, I measure 71mm. The straight edge was resting on the tire, but that's only about 1-2mm off from the wheel edge so actual distance is going to be right around 70

    Click image for larger version

Name:	image.png
Views:	1714
Size:	1,021.6 KB
ID:	206218​

    Leave a comment:

Working...
X