Announcement

Collapse
No announcement yet.

Wireless CarPlay and AA on stock MKIV nav screen, including touch screen support!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WOLFN8TR
    replied
    I didn't either as I haven't found a decent camera yet.

    Leave a comment:


  • duracellttu
    replied
    Ahh gotcha. I don't plan to install a reverse camera, so looks like that isn't needed.

    Leave a comment:


  • WOLFN8TR
    replied
    Yes I have the BlueBus and CarPlay.

    The two wires on my retrofit cable are for Audio for the HDMI input for a Firestick. You obviously do not have that.

    The Blue wire is the reverse sensing wire for the backup camera. Make sure the backup camera you go with has a RCA Video input.

    Leave a comment:


  • duracellttu
    replied
    Thanks for the details?

    Are you using the Apple CarPlay with a BlueBus unit? My retrofit cable doesn't have loose pins to connect. I only have the stereo jack with loose pins to add to the connector if I want to playback audio/video via the USB connector.


    Any idea what this blue wire connects to?

    Last edited by duracellttu; 07-30-2025, 04:27 PM.

    Leave a comment:


  • WOLFN8TR
    replied
    Originally posted by duracellttu View Post
    Did you happen to take any pics of the pin installation? I could use a sanity check when I start this over the weekend.
    I didn't unfortunately. The two pins wouldn't lock into the plug easily is the only issue I had. Oh and the sticky wiring loom!

    The two Yellow wires on the retrofit cable go into the BM53 white plug (B) pins 11 and 12 circled in Red. Yellow/Brown is the GND.

    The Jack cable for the USB has 3 wires. Red, Yellow and Black go into the BM53 black plug (C) pins 3,4 and 10. The Yellow wire on my cable is the White wire Baris mentions. The Black wire is GND pin 10.





    Last edited by WOLFN8TR; 07-30-2025, 10:15 AM.

    Leave a comment:


  • duracellttu
    replied
    Originally posted by WOLFN8TR View Post
    It all hooks up to everything in the trunk, I went the OEM controls. Real easy overall, the hardest part was setting the two pins in the factory plug.
    Did you happen to take any pics of the pin installation? I could use a sanity check when I start this over the weekend.

    Leave a comment:


  • WOLFN8TR
    replied
    It all hooks up to everything in the trunk, I went the OEM controls. Real easy overall, the hardest part was setting the two pins in the factory plug.

    Leave a comment:


  • duracellttu
    replied
    Originally posted by WOLFN8TR View Post
    I installed this system and it works great! Highly recommend it! ๐Ÿ˜Ž
    That's awesome to hear! I ordered units for both my cars and they will be ready soon.

    Any tips on routing the cables form the trunk to the center console?

    Leave a comment:


  • WOLFN8TR
    replied
    I installed this system and it works great! Highly recommend it! ๐Ÿ˜Ž

    Leave a comment:


  • whoissuprme
    replied
    Bumping this up as I have received the full retrofit package from Baris. Still haven't had the time to install it yet but I can't wait to rip my AVIN unit out of the dashboard. My car was a non-HK, non-nav car. I will try to document the install as much as possible and post some pictures when I finally get around to it

    Leave a comment:


  • Shonky
    replied


    Originally posted by lemoose View Post

    I have it on my m5. Quite happy with it with my only dissatisfaction being the image quality but I believe that is a limitation of using the TV output which I presume has a much lower resolution than the nav screen natively supports
    The stock nav screen is lower resolution than a typical TV signal. It's only 400x234. So it's the panel itself that's the limiting factor.

    Leave a comment:


  • Obioban
    replied
    Originally posted by karter16 View Post

    This is what made this option a non starter for me. Modern UI on a low res screen isn't a combo I could personally stomach.

    Not to say this isn't a very clever option that I'm sure suits a lot of people.


    Sent from my iPhone using Tapatalk
    Ha, to me thatโ€™s part of what makes it so awesome. Mix of old and new.

    Leave a comment:


  • karter16
    replied
    Originally posted by lemoose View Post

    I have it on my m5. Quite happy with it with my only dissatisfaction being the image quality but I believe that is a limitation of using the TV output which I presume has a much lower resolution than the nav screen natively supports
    This is what made this option a non starter for me. Modern UI on a low res screen isn't a combo I could personally stomach.

    Not to say this isn't a very clever option that I'm sure suits a lot of people.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • lemoose
    replied
    Originally posted by audipwr1 View Post
    Any folks on here using this? I would LOVE to get my oem navi unit moved to touch screen with carplay and a microphone - waze / amazon music / and handsfree cell phone calls are what I want
    I have it on my m5. Quite happy with it with my only dissatisfaction being the image quality but I believe that is a limitation of using the TV output which I presume has a much lower resolution than the nav screen natively supports

    Leave a comment:


  • audipwr1
    replied
    Any folks on here using this? I would LOVE to get my oem navi unit moved to touch screen with carplay and a microphone - waze / amazon music / and handsfree cell phone calls are what I want

    Leave a comment:

Working...
X