Announcement

Collapse
No announcement yet.

OE Euro headers vs copies - worth it?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • simonnim
    replied
    If someone is born here. And then educated here. But, opens a factory and designs and engineers parts to be made, produced in China, then exported for a lower price, is it still considered poor quality just because it's made in China?

    ​​​​​Not trying to provoke, just gotta ask.

    ​​​​​Because one of the goals of an engineer is to produce the best product ensuring it meets correct standards and also most cost effective.

    Also wanted to bring attention of some things I have designed specifically for m5board. Shipped to members at cost, but I highly over engineered the part for the sake of never looking at it again.

    Greetings everyone! Some of you may be familiar with a common issue with our M5s where the side mirrors fold/unfold but do not stop in the proper position during their sweep. Sometimes the mirror will choose a random spot to stop, other times the mirror completely rotates upward or downward...


    Same name there. I haven't been there since I've sold my m5.
    Last edited by simonnim; 10-17-2023, 09:34 PM.

    Leave a comment:


  • digger
    replied
    Originally posted by 9kracing View Post
    China can copy tubing sizes, bends, and merges, and therefore can usually produce a header that does in fact make decent power... because they're just copying someone else's R&D.

    The part where they fall short is material quality, and welds. If your header's welds pop after a year, did you really save any money?

    China can't copy this.

    China can also undercut the weld weld like them best of them

    Leave a comment:


  • bigjae46
    replied
    Originally posted by Chas3n View Post

    Lol as most of your technology is all from China.. but good to know you stop at their headers!


    Sent from my iPhone using Tapatalk Pro
    Tech was invented or created here and then produced in China. And later copied. China hasn't innovated shit in the last 30 years.

    Leave a comment:


  • Jimbo's M
    replied
    Originally posted by Chas3n View Post

    Lol as most of your technology is all from China.. but good to know you stop at their headers!
    Is that what you got outta that? The thread is about headers. AFAIC, if you're not part of the solution, you're part of the problem. Period.

    Leave a comment:


  • Chas3n
    replied
    Originally posted by Obioban View Post

    There is the slave labor, genocide, forced organ harvesting, using rape as a form of torture, utter devastation of the environment, and doing everything they can to destroy our country.

    but, hey, cheaper headers!
    Lol as most of your technology is all from China.. but good to know you stop at their headers!


    Sent from my iPhone using Tapatalk Pro

    Leave a comment:


  • bigjae46
    replied
    Originally posted by 9kracing View Post
    China can copy tubing sizes, bends, and merges, and therefore can usually produce a header that does in fact make decent power... because they're just copying someone else's R&D.

    The part where they fall short is material quality, and welds. If your header's welds pop after a year, did you really save any money?

    China can't copy this.

    Actually that may not be a great weld. Blue/purple on stainless is oxidation which promotes corrosion. A gold/copper color indicates a properly shielded (and won't corrode) weld.

    Leave a comment:


  • Obioban
    replied
    Originally posted by Jimbo's M View Post
    There are plenty of other reasons to NOT buy Chinese junk besides being Chinese junk. Just sayin'.
    There is the slave labor, genocide, forced organ harvesting, using rape as a form of torture, utter devastation of the environment, and doing everything they can to destroy our country.

    but, hey, cheaper headers!

    Leave a comment:


  • Jimbo's M
    replied
    There are plenty of other reasons to NOT buy Chinese junk besides being Chinese junk. Just sayin'.

    Leave a comment:


  • 9kracing
    replied
    China can copy tubing sizes, bends, and merges, and therefore can usually produce a header that does in fact make decent power... because they're just copying someone else's R&D.

    The part where they fall short is material quality, and welds. If your header's welds pop after a year, did you really save any money?

    China can't copy this.


    Leave a comment:


  • Chas3n
    replied
    Originally posted by Obioban View Post

    One of the main problems with buying stuff from china is the quality will change, without warning. So, headers may be fine one day, and trash the next.

    It leaked a while back that Apple sends 50 people to China per day, on a single airline (presumably more, once other airlines are factored in), just for QC. That's the kind of baby sitting you need if you want consistent quality.

    This is an issue we've encountered again and again and again and again and again and again and again and again and again at the company where I work, which gets. alot of welded metal components from China.
    At the moment, current documented sets being installed for thousands of miles would confirm my post.

    Again, I agree with 95% of parts being from there being mostly miss. Both Megan headers and the Avin headunit seem to be 90%+ approval rating from fellow forum members and enthusiasts.


    Sent from my iPhone using Tapatalk Pro

    Leave a comment:


  • Obioban
    replied
    Originally posted by Chas3n View Post

    Trying again..

    While I can agree, most products from that part of the world can be incredibly inferior, those headers are possibly one of the few products someone could trust to have on their car.

    To blanket all parts form China as a no go is doing yourself a disservice.


    Sent from my iPhone using Tapatalk Pro
    One of the main problems with buying stuff from china is the quality will change, without warning. So, headers may be fine one day, and trash the next.

    It leaked a while back that Apple sends 50 people to China per day, on a single airline (presumably more, once other airlines are factored in), just for QC. That's the kind of baby sitting you need if you want consistent quality.

    This is an issue we've encountered again and again and again and again and again and again and again and again and again at the company where I work, which gets. alot of welded metal components from China.

    Leave a comment:


  • Chas3n
    replied
    Originally posted by jet_dogg View Post
    I don't know about lci headers but one time I got csl headers I couldn't believe how light and delicate they were. I probably should have kept them.

    You couldn't pay me to put some china headers on my car
    Trying again..

    While I can agree, most products from that part of the world can be incredibly inferior, those headers are possibly one of the few products someone could trust to have on their car.

    To blanket all parts form China as a no go is doing yourself a disservice.


    Sent from my iPhone using Tapatalk Pro

    Leave a comment:


  • Obioban
    replied
    Mine fit up, alignment wise-- but getting them into that location was certainly trickier than the OE euros I used on the M3 wagon.

    Leave a comment:


  • Tbonem3
    replied
    And the flanges aren't perfectly straight like OE. They're not heavier than stock u.s. headers, but they are heavier than euro/csl which becomes an issue when you're laying on your back trying to feed both banks through.

    Sometimes SS headers are about as easy as stock fitment-wise, sometimes quite difficult. SS seems to vary a little from batch to batch.

    Leave a comment:


  • Obioban
    replied
    Originally posted by Nate047 View Post
    Alright so let me ask, when people are saying SuperSprint is more difficult to instal, is that because the design makes them harder to fit in there while the engine is in the car? Or are they made not as well and don't always line up? Just trying to understand the exact gripe.
    They're physically larger.

    Leave a comment:

Working...
X