F8X M3/M4 CF Drive shaft mod

[ugaexploder]

Understood, appreciate the explanation. I guess the real concern would be high speed based on your experience with incorrect lengths and what better place to test than Germany if driven on the bahn.

[EthanolTurbo]

Little confused here, but weren't we waiting on your report not Altaran?

I'm not going to lie, I have zero confidence in this mod still.

I mean he did the exact same thing but his shop did the measurements correctly the first time, I had to get my driveshaft modified a 2nd time. I had no issues or vibrations until 80+ mph and they went back and shortened it slightly. They told me if the length is off even a tiny bit it will cause vibration.

I still have't tested out the new revision but I'm fairly confident it works fine, especially now that a counterpart in Europe has tested it for a decent amount of miles.

[ugaexploder]

Just let me know when you guys need driveshafts. It's a great mod as long as the measurements are done right.

Little confused here, but weren't we waiting on your report not Altaran?

I'm not going to lie, I have zero confidence in this mod still.

[Altaran]

Does it feel significantly different than stock?

It revs better. It is almost like changing from a dual mass to a single mass flywheel. Not quite as significant but noticeable.

I also had a clunck with the old driveshaft, probably due to worn bearings. It's gone now.

Gesendet von meinem Pixel 7 mit Tapatalk

[EthanolTurbo]

Okay perfect I’m ready for the group buy.
EthanolTurbo Hi! 🥰

Just let me know when you guys need driveshafts. It's a great mod as long as the measurements are done right.

[Ramps]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

Does it feel significantly different than stock?

[x Spades x]

I'm in. I already have a driveshaft ready to go!

[0-60motorsports]

As long as Matt/Euroconnex isn't doing the CuRaTiNg

You mean the CUNTaking?


Sent from my iPhone using Tapatalk

[SQ13]

As long as Matt/Euroconnex isn’t doing the CuRaTiNg

[bigjae46]

Let's start the curating!

[SQ13]

Okay perfect I’m ready for the group buy.
EthanolTurbo Hi! 🥰

[0-60motorsports]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

That's great news! Thanks for the feedback.

[Altaran]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

[EthanolTurbo]

Will let you guys know as soon as I can. I have to fix the misfires that popped up last time I drove the car. My brother is most likely going to throw the driveshaft in and test it since I don't have time currently.

[bigjae46]

Any news yet? I hope this works out.

Let me know if there is still an issue. I can call Powertrain Industries and let them know their referral didn't work out. Not sure if Powertrain Industries has any relationship other than they used to work for them.