F8X M3/M4 CF Drive shaft mod

[EthanolTurbo]

Okay perfect I’m ready for the group buy.
EthanolTurbo Hi! 🥰

Just let me know when you guys need driveshafts. It's a great mod as long as the measurements are done right.

[Ramps]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

Does it feel significantly different than stock?

[x Spades x]

I'm in. I already have a driveshaft ready to go!

[0-60motorsports]

As long as Matt/Euroconnex isn't doing the CuRaTiNg

You mean the CUNTaking?


Sent from my iPhone using Tapatalk

[SQ13]

As long as Matt/Euroconnex isn’t doing the CuRaTiNg

[bigjae46]

Let's start the curating!

[SQ13]

Okay perfect I’m ready for the group buy.
EthanolTurbo Hi! 🥰

[0-60motorsports]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

That's great news! Thanks for the feedback.

[Altaran]

Figured I'd give an update.

I've now put over 1000 kilometers on my CF shaft and have zero issues. No track yet, still waiting on a Dyno tune before that.

Gesendet von meinem Pixel 7 mit Tapatalk

[EthanolTurbo]

Will let you guys know as soon as I can. I have to fix the misfires that popped up last time I drove the car. My brother is most likely going to throw the driveshaft in and test it since I don't have time currently.

[bigjae46]

Any news yet? I hope this works out.

Let me know if there is still an issue. I can call Powertrain Industries and let them know their referral didn't work out. Not sure if Powertrain Industries has any relationship other than they used to work for them.

[EthanolTurbo]

Any updates?

Should have an update in a week or so.

[Bry5on]

While we’re waiting, does anyone have both outer diameter measurements handy? I’d like to do the math to quantify the stiffness benefit.

[WestBankM4]

I unfortunately did my 6-speed swap too early, I have a F8x driveshaft sitting in my garage with no one to install it. Waiting for feedback, might have to take a trip to LA soon.

[0-60motorsports]

I've decided I'm going to do this when I do the clutch on my SMG M3.