e46 M3 Community-designed CAD files Master List

[M3Hokie]

Would you be able to get a download for the two scans you posted onto Google Drive or something like that? I’m trying to create a snorkel that would directly duct from both the brake duct and the upper kidney grill duct. Appreciate the help!

Lol looks like we both had the same idea!

[Vanar]

For everyone else, I’ve been working on a mirror switch block off trim piece, need to work out some fit issues, will upload once I’ve gotten it to fit

[Vanar]

Sure! This should work: https://drive.google.com/file/d/193A...UBAJ8t-fz/view

Awesome! This will be super helpful. Btw, I see you’re in the Bay Area as well, would you know anyone who’d be willing to let me scan their CSL airbox? Have someone willing to let me scan it if I can bring it over to them. I do have someone willing to let me scan their box already, but I’m not sure when that would be.

[heinzboehmer]

Would you be able to get a download for the two scans you posted onto Google Drive or something like that? I’m trying to create a snorkel that would directly duct from both the brake duct and the upper kidney grill duct. Appreciate the help!

Sure! This should work: https://drive.google.com/file/d/193A...UBAJ8t-fz/view

[Vanar]

When sharing, there's an option to explicitly enable downloading. I turned that on, but site is being funny.

Would you be able to get a download for the two scans you posted onto Google Drive or something like that? I’m trying to create a snorkel that would directly duct from both the brake duct and the upper kidney grill duct. Appreciate the help!

[M3Hokie]

When sharing, there's an option to explicitly enable downloading. I turned that on, but site is being funny.

Sent you a PM, thank you sir.

[heinzboehmer]

Perhaps this setting? I was curious to make something like NIco above out of PA6 but I ended up just getting a race box.

When sharing, there's an option to explicitly enable downloading. I turned that on, but site is being funny.

[discoelk]

Huh, weird. You're definitely supposed to be able to download them. I updated the links in my post, can you try again?

If it still doesn't work, PM me your email and I can send you the mesh files directly (they're too big to upload here).

Perhaps this setting? I was curious to make something like NIco above out of PA6 but I ended up just getting a race box.

[0-60motorsports]

No but it would be easy to model. What oil bottle and what rear tray, amplifier or non?

universal, bmw or motul as thats all i would use. car is euro spec with amp/tv module, etc etc.....

[discoelk]

No but it would be easy to model. What oil bottle and what rear tray, amplifier or non?

[0-60motorsports]

Does anyone have a CAD file for oil bottle holder in the trunk for our cars? Willing to pay for someone to print and mail it to me please. 🤣

[heinzboehmer]

Appreciate it Heinz! Forgive my ignorance as I've never used that site before, but I don't see a download button. Is it possible to download the file to import the mesh into my CAD application? If not, even just being able to measure in that web app will prove useful so thanks either way!

Huh, weird. You're definitely supposed to be able to download them. I updated the links in my post, can you try again?

If it still doesn't work, PM me your email and I can send you the mesh files directly (they're too big to upload here).

[M3Hokie]

Messy scan of the Karbonius snorkel: https://s.digital3dcloud.com/space/f...8-fad9ae1ec8fa
Karb snorkel in relation to chassis and bumper: https://s.digital3dcloud.com/space/f...0-a67e5041f647

Note that the Karb snorkel is NOT the same as the OE CSL flap. The snout of the snorkel is clocked slightly differently. IIRC, when installed, the end of the Karb snout is ~10mm off of where the OE flap sits. Don't think any of this matters for your purposes, but it's worth pointing out.

Hope those help!

Appreciate it Heinz! Forgive my ignorance as I've never used that site before, but I don't see a download button. Is it possible to download the file to import the mesh into my CAD application? If not, even just being able to measure in that web app will prove useful so thanks either way!

[nicoisengineer]

Does somebody have a 3D scan of the CSL door cards? Interested in designing a model to make my own CF ones.

[heinzboehmer]

Does anyone have a scan of any flavor of CSL snorkel? I’m working on a snorkel that can interface with the non-CSL bumper brake duct as well as the oem ducting from the kidney grills. Would love to have a reference mesh, it would save me a lot of printing and fit up.

Messy scan of the Karbonius snorkel: https://s.digital3dcloud.com/space/file?shareID=8127fe97-2812-56bc-8ede-c4ed0c227cad
Karb snorkel in relation to chassis and bumper: https://s.digital3dcloud.com/space/file?shareID=0a700789-b74e-5fac-8ad1-b5d5b0ca30be

Note that the Karb snorkel is NOT the same as the OE CSL flap. The snout of the snorkel is clocked slightly differently. IIRC, when installed, the end of the Karb snout is ~10mm off of where the OE flap sits. Don't think any of this matters for your purposes, but it's worth pointing out.

Hope those help!