e46 M3 Community-designed CAD files Master List

[heinzboehmer]

Perhaps this setting? I was curious to make something like NIco above out of PA6 but I ended up just getting a race box.

When sharing, there's an option to explicitly enable downloading. I turned that on, but site is being funny.

[discoelk]

Huh, weird. You're definitely supposed to be able to download them. I updated the links in my post, can you try again?

If it still doesn't work, PM me your email and I can send you the mesh files directly (they're too big to upload here).

Perhaps this setting? I was curious to make something like NIco above out of PA6 but I ended up just getting a race box.

[0-60motorsports]

No but it would be easy to model. What oil bottle and what rear tray, amplifier or non?

universal, bmw or motul as thats all i would use. car is euro spec with amp/tv module, etc etc.....

[discoelk]

No but it would be easy to model. What oil bottle and what rear tray, amplifier or non?

[0-60motorsports]

Does anyone have a CAD file for oil bottle holder in the trunk for our cars? Willing to pay for someone to print and mail it to me please. 🤣

[heinzboehmer]

Appreciate it Heinz! Forgive my ignorance as I've never used that site before, but I don't see a download button. Is it possible to download the file to import the mesh into my CAD application? If not, even just being able to measure in that web app will prove useful so thanks either way!

Huh, weird. You're definitely supposed to be able to download them. I updated the links in my post, can you try again?

If it still doesn't work, PM me your email and I can send you the mesh files directly (they're too big to upload here).

[M3Hokie]

Messy scan of the Karbonius snorkel: https://s.digital3dcloud.com/space/f...8-fad9ae1ec8fa
Karb snorkel in relation to chassis and bumper: https://s.digital3dcloud.com/space/f...0-a67e5041f647

Note that the Karb snorkel is NOT the same as the OE CSL flap. The snout of the snorkel is clocked slightly differently. IIRC, when installed, the end of the Karb snout is ~10mm off of where the OE flap sits. Don't think any of this matters for your purposes, but it's worth pointing out.

Hope those help!

Appreciate it Heinz! Forgive my ignorance as I've never used that site before, but I don't see a download button. Is it possible to download the file to import the mesh into my CAD application? If not, even just being able to measure in that web app will prove useful so thanks either way!

[nicoisengineer]

Does somebody have a 3D scan of the CSL door cards? Interested in designing a model to make my own CF ones.

[heinzboehmer]

Does anyone have a scan of any flavor of CSL snorkel? I’m working on a snorkel that can interface with the non-CSL bumper brake duct as well as the oem ducting from the kidney grills. Would love to have a reference mesh, it would save me a lot of printing and fit up.

Messy scan of the Karbonius snorkel: https://s.digital3dcloud.com/space/file?shareID=8127fe97-2812-56bc-8ede-c4ed0c227cad
Karb snorkel in relation to chassis and bumper: https://s.digital3dcloud.com/space/file?shareID=0a700789-b74e-5fac-8ad1-b5d5b0ca30be

Note that the Karb snorkel is NOT the same as the OE CSL flap. The snout of the snorkel is clocked slightly differently. IIRC, when installed, the end of the Karb snout is ~10mm off of where the OE flap sits. Don't think any of this matters for your purposes, but it's worth pointing out.

Hope those help!

[M3Hokie]

Does anyone have a scan of any flavor of CSL snorkel? I’m working on a snorkel that can interface with the non-CSL bumper brake duct as well as the oem ducting from the kidney grills. Would love to have a reference mesh, it would save me a lot of printing and fit up.

[0-60motorsports]

I installed the 1:1 Version. Im sure it'll hold up just fine and i will give you feedback after the summer. the "real" test LOL. Cheers.

[heinzboehmer]

Uploading a recreation of the CSL flap seal.

There are two versions attached: the first is a 1:1 replica and the second is a slightly modified version so that it can print flat on the bed plate without supports. This should be printed out of some relatively stiff (95A or so) TPU.

Note that you'll need to print two, one for each side of the flap.

CAD here: https://cad.onshape.com/documents/cf...025a2e9c87b392

1:1:



Print optimized:



See this post to see the print optimized part installed on 0-60motorsports's car: https://nam3forum.com/forums/forum/m...014#post357014

Also, just for reference, here are some pictures of a basically new OE flap:

[Nate047]

Also does anyone have some alternatives, like plugs or block off plate type of things for these?

[Nate047]

Hey guys, anyone have these?

51468213970

https://www.fcpeuro.com/products/bmw...ck-51468213970

[karter16]

CSL SMG Reservoir Bracket

This bracket is designed to take advantage of the existing stud on the M3's front left shock tower. It saves having to drill and rivet the OE CSL bracket. This part replaces part 41147896136.

PLEASE NOTE: This piece has been designed on a car that has a Karbonius CSL airbox and Haimus snorkel. I cannot be 100% sure that it fits other combos. If you encounter any fitment issues with your particular combo please reach out to me!

I recommend printing this in PETG-CF or better. I also recommend using a thin foam washer between the bracket and the shock tower to protect the paint, plus an M6 washer and M6 lock nut.



K16 - 04A - CSL SMG Reservoir Bracket.stl.zip