SMG to 6MT Conversion

[George Hill]

Nope, ashtray wiring still intact. I'll take a pic next time I'm in the car

It's been a couple of years so I'm fuzzy on the details, but I think it was tucked away from the other wires down there and I had to look for it, but it was there waiting to be plugged in. I was kind of amazed, myself.

What is the production date of your car?

[SQ13]

Including clutch and flywheel?

Sorry, $4300. Excludes clutch and flywheel (replaced ~10k miles ago).

[ATB88]

I have not seen that, do you have a pic?

Maybe you stole the wiring from the ashtray?

Nope, ashtray wiring still intact. I'll take a pic next time I'm in the car

It's been a couple of years so I'm fuzzy on the details, but I think it was tucked away from the other wires down there and I had to look for it, but it was there waiting to be plugged in. I was kind of amazed, myself.

[George Hill]

Not true. The connector's there. It was on mine. IIRC it was taped off, but definitely there. My knob is illuminated and I did no wiring in the gear shifter area.

I have not seen that, do you have a pic?

Maybe you stole the wiring from the ashtray?

[ATB88]

Has to be wired in.

Not true. The connector's there. It was on mine. IIRC it was taped off, but definitely there. My knob is illuminated and I did no wiring in the gear shifter area.

[S3diment]

Decided to have a shop do the work instead of DIYing. $3300 + provided AS SSK and OE shift lever. $230 for a new shift lever hurts my soul. Car should be a 6MT by the end of the month.

Is there a connector for the illuminated shift knob in the shifter area, or will it need to be wired in?

Including clutch and flywheel?

[George Hill]

Is there a connector for the illuminated shift knob in the shifter area, or will it need to be wired in?

Has to be wired in.

[SQ13]

Decided to have a shop do the work instead of DIYing. $3300 + provided AS SSK and OE shift lever. $230 for a new shift lever hurts my soul. Car should be a 6MT by the end of the month.

Is there a connector for the illuminated shift knob in the shifter area, or will it need to be wired in?

[CSLManual]

How much we talking?!?

details here: https://nam3forum.com/forums/forum/c...lugs#post79080

[Zack]

Anyone doing this, I now sell custom plugs to fit in the steering wheel where the paddles used to be. You may have seen them on Facebook briefly, I'm just waiting until I have enough posts to be able to post them for sale on here.

How much we talking?!?

[0-60motorsports]

Anyone doing this, I now sell custom plugs to fit in the steering wheel where the paddles used to be. You may have seen them on Facebook briefly, I'm just waiting until I have enough posts to be able to post them for sale on here.

That’s excellent

[CSLManual]

Anyone doing this, I now sell custom plugs to fit in the steering wheel where the paddles used to be. You may have seen them on Facebook briefly, I'm just waiting until I have enough posts to be able to post them for sale on here.

[sapote]

Standard drill bit length should be enough.

[pawelgawel]

I have access to machine shop and had planned out what to do, but had not done yet. What do you want to know?

curious to know what length of drill bits ill need to have on hand to have the proper clearance.. have you sort that out yet?

[SQ13]

Make sure to use your BH and don't swap with another modified BH.

Yup. Def will retain my bellhousing. I don’t want other peoples’ high-mileage parts.

Trying to decide whether or not I want to attempt to DIY this. Would save me maybe $1500 as long as I don’t fuck it up.