Rear spring platform height adjustment

[ac427]

I just got the Rogue Eng ones just last week after 6 months from ordering

They revised the threaded adjuster to be shorter for easier adjustability and not get in the way since the axle almost blocks the area entirely

The base plates are raw metal, which was surprising to see the job half-done, but plan on unscrewing the assembly and just spraying them in por15

Six months!
I presume it may be the same from GC if they are all made by the same company.

When you say they made the adjuster screw shorter. Did mean the head of the adjustment screw only or the overall length too?

I am just concerned that the maximum height of the adjustment and ride height may have been reduced?

[HennyM3]

I just got the Rogue Eng ones just last week after 6 months from ordering

They revised the threaded adjuster to be shorter for easier adjustability and not get in the way since the axle almost blocks the area entirely

The base plates are raw metal, which was surprising to see the job half-done, but plan on unscrewing the assembly and just spraying them in por15

[fattycharged]

Thank you. The only difference i could see is that the GC part is powder coated and the RE one doesn't appear to have any rust protection.

Do you have either make fitted to your car?

GC


Sent from my iPhone using Tapatalk

[ac427]

Make sure whichever you order from actually has them in stock…they're the same product, so pick your ID and just confirm availability


Sent from my iPad using Tapatalk Pro

Thank you. The only difference i could see is that the GC part is powder coated and the RE one doesn't appear to have any rust protection.

Do you have either make fitted to your car?

[ac427]

I’ve had the Rogue ones since 2012 and they’re still working well. Super easy to adjust the height.

Thanks. They appear to be bare metal looking at the pictures on the RE website.

How are they doing with corrosion?

[fattycharged]

Make sure whichever you order from actually has them in stock…they're the same product, so pick your ID and just confirm availability


Sent from my iPad using Tapatalk Pro

[ac427]

Thank you both

[Ramps]

I’ve had the Rogue ones since 2012 and they’re still working well. Super easy to adjust the height.

[oceansize]

https://www.rogueengineering.com/Rogue-Engineering-E36E46-Articulating-Spring-Perches-Pair_p_76.html

[ac427]

I noticed that Ground Control make an adjustable height rear spring platform, that is adjustable on the car via the hole in the rear camber arm.

Do any other manufacturers make an equivalent 'on car' adjustable product like this?

https://groundcontrolstore.com/collections/half-moon-mount/products/bmw-e46-e36-weight-jack-pair