Announcement

Collapse
No announcement yet.

MSS54 DS2 Tool: FREE - DME tune, program, flash counter, codes, adaptions, etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • karter16
    replied
    Originally posted by Cubieman View Post
    Sorry to take this thread a bit off-topic, but could anyone send me MSS54.prg and/or MSS54HP.prg?

    Now I am genuinely wanting to test my ebox fan and can't as I only have MSS54DSO.prg which apparently does not allow for these tests.

    Seeing as Karter's tool won't engage the fan yet seems to work fine for others I'm sure its not his program, yet I would still like to try tool32, but can't w/o the correct prg.
    attached is 12MSS54.PRG. I don't have MSS54HP.PRG.

    Don't suppose you happen to have the DTC for the ebox fan disabled? That could also cause what you're seeing with the test not being able to run.
    Attached Files

    Leave a comment:


  • karter16
    replied
    Originally posted by Cubieman View Post
    I tried the CSL flap test with and without the engine running.

    Makes a somewhat loud buzzing sound for less than a second and produces this error message.

    Click image for larger version  Name:	20260530_150814.jpg Views:	8 Size:	129.3 KB ID:	356963

    Click image for larger version Name:	20260530_150251.jpg Views:	0 Size:	36.4 KB ID:	356962
    Okay so you got that error because the conditions for the test were not met. The conditions that must be met are:

    Click image for larger version

Name:	Screenshot 2026-05-31 at 4.48.07 PM.png
Views:	133
Size:	6.2 KB
ID:	356998​

    b_diag is definitely !=0 because the app is responsible for setting diagnostic mode over DS2 and the app would have errored out earlier if it couldn't set this.

    N (engine speed) must be less that 1000rpm.

    bit 6 of gks_ed must be 0. Bit 6 identifies whether there are any current (active) CSL flap errors in error memory.

    If you're able to validate you were doing the test with the engine not running, or with it at warm idle less than 1000rpm, and also check error memory and see if you have any CSL flap (GKS) errors would be the next step I think.

    Leave a comment:


  • Cubieman
    replied
    Sorry to take this thread a bit off-topic, but could anyone send me MSS54.prg and/or MSS54HP.prg?

    Now I am genuinely wanting to test my ebox fan and can't as I only have MSS54DSO.prg which apparently does not allow for these tests.

    Seeing as Karter's tool won't engage the fan yet seems to work fine for others I'm sure its not his program, yet I would still like to try tool32, but can't w/o the correct prg.
    Last edited by Cubieman; 05-30-2026, 07:37 PM.

    Leave a comment:


  • ac427
    replied
    Originally posted by karter16 View Post

    nice one! I don't know where I got 80 degrees from then!? could have sworn that's what it was for ISTA when I checked, but checked again and it's 75 there too. Will amend. Yeah I decided the no errors in the DME condition wasn't worth doing, especially given people are probably running these tests when diagnosing an issue, it didn't seem like a realistic condition. I get what they're saying in that if there's an issue with the module being tested the test won't be successful, but that's kinda the point haha.
    All good. The E-Box fan test worked ok for me too.

    Would it be possible to display the DME temperature in the that test also?

    Leave a comment:


  • karter16
    replied
    Originally posted by ac427 View Post

    Stop the presses. The DIS VANOS test prerequisites are:

    Engine running at idle
    Coolant temp > 75°C
    Oil temp > 40°C.
    No errors in the DME - I don't think that is very useful. Perhaps an override for that, for those of us who do not want to clear the fault memory to run the VANOS test?

    Click image for larger version

Name:	DIS ScreenShot 01.jpg
Views:	118
Size:	140.9 KB
ID:	356950

    ​ ​
    nice one! I don't know where I got 80 degrees from then!? could have sworn that's what it was for ISTA when I checked, but checked again and it's 75 there too. Will amend. Yeah I decided the no errors in the DME condition wasn't worth doing, especially given people are probably running these tests when diagnosing an issue, it didn't seem like a realistic condition. I get what they're saying in that if there's an issue with the module being tested the test won't be successful, but that's kinda the point haha.

    Leave a comment:


  • Cubieman
    replied
    Originally posted by karter16 View Post

    huh interesting. works fine for me. although that's the error message I get if I try the DMTL test (which is not installed on my car). I wonder if not all cars handle the e-box fan in the same way?
    I'll see if there if maybe ISTA can activate it, I may have some type of fan or wiring issue as well for all I know.

    Nice program though, very streamlined!

    Leave a comment:


  • karter16
    replied
    Originally posted by Cubieman View Post
    Also tried the ebox fan and got this:

    Click image for larger version

Name:	20260530_151052.jpg
Views:	90
Size:	110.2 KB
ID:	356966
    huh interesting. works fine for me. although that's the error message I get if I try the DMTL test (which is not installed on my car). I wonder if not all cars handle the e-box fan in the same way?

    Leave a comment:


  • Cubieman
    replied
    Also tried the ebox fan and got this:

    Click image for larger version

Name:	20260530_151052.jpg
Views:	90
Size:	110.2 KB
ID:	356966

    Leave a comment:


  • karter16
    replied
    Originally posted by Cubieman View Post
    I tried the CSL flap test with and without the engine running.

    Makes a somewhat loud buzzing sound for less than a second and produces this error message.

    Click image for larger version

Name:	20260530_150814.jpg
Views:	143
Size:	129.3 KB
ID:	356963

    Click image for larger version Name:	20260530_150251.jpg Views:	0 Size:	36.4 KB ID:	356962
    thank you! Investigating this now!

    Leave a comment:


  • Cubieman
    replied
    I tried the CSL flap test with and without the engine running.

    Makes a somewhat loud buzzing sound for less than a second and produces this error message.

    Click image for larger version

Name:	20260530_150814.jpg
Views:	143
Size:	129.3 KB
ID:	356963

    Click image for larger version  Name:	20260530_150251.jpg Views:	0 Size:	36.4 KB ID:	356962

    Leave a comment:


  • Slideways
    replied
    Originally posted by 0-60motorsports View Post

    Yeah that's what I thought mate. My cousin has a windows tablet, told him to bring it over and I'll download the tablet and give it a shot once the car is back.
    The beauty of this is you do not need a dedicated Windows laptop anymore. Plus newer laptops are way faster and have proper battery life.

    Leave a comment:


  • ac427
    replied
    Here are some DIS VANOS test reference results i got back in December 2024:

    Click image for larger version  Name:	DIS v57 Revtor-2024-11-25-15-04-31.png Views:	0 Size:	23.9 KB ID:	356954​

    Leave a comment:


  • ac427
    replied
    Originally posted by karter16 View Post

    You know what - I had the same issue, but that my thermostat is old and so opens slightly colder than designed. Couple of options: 1 is to do exactly as you say and have an override in settings. Could make it a select for people with 70, 75, 80 thermostats, and default to 80. Alternative would be to use oil temp as the pre-req not coolant temp. It's not exactly what the original test procedure calls for, but tbh if the oil is warmed up I don't really see how a small variance in TMOT would affect the test in any way?
    Stop the presses. The DIS VANOS test prerequisites are:

    Engine running at idle
    Coolant temp > 75°C
    Oil temp > 40°C.
    No errors in the DME - I don't think that is very useful. Perhaps an override for that, for those of us who do not want to clear the fault memory to run the VANOS test?

    Click image for larger version

Name:	DIS ScreenShot 01.jpg
Views:	118
Size:	140.9 KB
ID:	356950

    ​ ​
    Last edited by ac427; 05-30-2026, 11:47 AM.

    Leave a comment:


  • karter16
    replied
    Originally posted by ac427 View Post
    Would it be possible to display TMOT in the Engine Fan Test?
    Great idea! will add this.

    Originally posted by ac427 View Post
    Are the test results recorded in any of the logs?
    ​

    They currently are not, nor are they recorded in History. That's a good point though. Probably for the tests that generate resultant information that info should be both exportable and recorded in History. Thanks for this, will have a think about how to best do this.

    Leave a comment:


  • karter16
    replied
    Originally posted by ac427 View Post
    I am running one of Anri's 70°C thermostats. So even after some spirited driving, the motor temperature once i had parked on the driveway was an annoying 79°C, just below the VANOS test's 80°C threshold. So i turned the A/C on and performed an engine fan test at 10% for a little while to raise the engine temperature.

    Would it be possible to display TMOT in the Engine Fan Test?

    I did think about requesting a temp override for the VANOS test but that would skew the community's VANOS test results.
    You know what - I had the same issue, but that my thermostat is old and so opens slightly colder than designed. Couple of options: 1 is to do exactly as you say and have an override in settings. Could make it a select for people with 70, 75, 80 thermostats, and default to 80. Alternative would be to use oil temp as the pre-req not coolant temp. It's not exactly what the original test procedure calls for, but tbh if the oil is warmed up I don't really see how a small variance in TMOT would affect the test in any way?

    Leave a comment:

Working...
X