Announcement

Collapse
No announcement yet.

MSS54 DS2 Tool: FREE - DME tune, program, flash counter, codes, adaptions, etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • karter16
    replied
    Originally posted by Slideways View Post
    karter16 there was a thread on M3F where a few people posted their VANOS test results. On healthy units, a fast response was around 190-225ms. Between 250-300ms was considered average to slower and over 300ms was considered slow. IIRC, almost all VANOS tests in that thread were below 300ms.
    Thanks for this I knew that we'd collectively arrived at some conclusions but couldn't remember what they were!

    Leave a comment:


  • karter16
    replied
    Originally posted by 0-60motorsports View Post

    Yeah that's what I thought mate. My cousin has a windows tablet, told him to bring it over and I'll download the tablet and give it a shot once the car is back.
    If you have an Apple Silicon MacBook Pro you can run VMware and Windows 11 for ARM. Microsoft don't seem to enforce a trial period or activation period for Windows for ARM if used in a VM so you can currently just use the free install for forever.

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by ac427 View Post

    You could but you would need a Windows licence for the Windows VM.

    Just get a cheap Windows laptop mate.
    Yeah that's what I thought mate. My cousin has a windows tablet, told him to bring it over and I'll download the tablet and give it a shot once the car is back.

    Leave a comment:


  • ac427
    replied
    Originally posted by 0-60motorsports View Post

    Since I'm not an expert are you saying I install that on my MacBook Pro and then this application should work?
    You could but you would need a Windows licence for the Windows VM.

    Just get a cheap Windows laptop mate.

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by Slideways View Post

    VMware for Mac is free - https://www.vmware.com/products/desk...ion-and-fusion

    M3dragon has a working CSL flap and might be able to test it.

    karter16 there was a thread on M3F where a few people posted their VANOS test results. On healthy units, a fast response was around 190-225ms. Between 250-300ms was considered average to slower and over 300ms was considered slow. IIRC, almost all VANOS tests in that thread were below 300ms.
    Since I'm not an expert are you saying I install that on my MacBook Pro and then this application should work?

    Leave a comment:


  • Slideways
    replied
    Originally posted by 0-60motorsports View Post

    Unfortunately I don't have vm and no windows laptop right now. I'm sorry I could not be of immediate help.

    I am planning to get a windows laptop soon though.
    VMware for Mac is free - https://www.vmware.com/products/desk...ion-and-fusion

    M3dragon has a working CSL flap and might be able to test it.

    karter16 there was a thread on M3F where a few people posted their VANOS test results. On healthy units, a fast response was around 190-225ms. Between 250-300ms was considered average to slower and over 300ms was considered slow. IIRC, almost all VANOS tests in that thread were below 300ms.

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by ac427 View Post

    No worries mate. I just remembered you had the flap wired in. All good 👍
    Thanks mate. I am really excited for this thanks to Karter. So many headaches are going to be gone for me once I can find the right windows laptop to use this with.

    Leave a comment:


  • ac427
    replied
    Originally posted by 0-60motorsports View Post

    Unfortunately I don't have vm and no windows laptop right now. I'm sorry I could not be of immediate help.

    I am planning to get a windows laptop soon though.
    No worries mate. I just remembered you had the flap wired in. All good 👍

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by ac427 View Post

    I'm not sure if this covers your Mac:

    System Requirements: - The app runs on Windows 10/11 (x86, x64 and ARM64 (works great on a VM on Apple Silicon)) with the .Net 8.0 Desktop Runtime
    - The app supports OBD2 (FTDI D2xx driver) cables, and also supports COM.
    Unfortunately I don't have vm and no windows laptop right now. I'm sorry I could not be of immediate help.

    I am planning to get a windows laptop soon though.

    Leave a comment:


  • ac427
    replied
    Originally posted by 0-60motorsports View Post

    I might have missed this but does this program work on a Mac? Cars in the shop now so I can test it when it's back in a day or two.
    I'm not sure if this covers your Mac:

    System Requirements: - The app runs on Windows 10/11 (x86, x64 and ARM64 (works great on a VM on Apple Silicon)) with the .Net 8.0 Desktop Runtime
    - The app supports OBD2 (FTDI D2xx driver) cables, and also supports COM.

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by ac427 View Post

    I think you have the CSL Flap working on your car. Are you able to do the CSL Flap test?
    I might have missed this but does this program work on a Mac? Cars in the shop now so I can test it when it's back in a day or two.

    Leave a comment:


  • ac427
    replied
    Originally posted by 0-60motorsports View Post

    That is so cool! Thank you.


    Sent from my iPhone using Tapatalk
    I think you have the CSL Flap working on your car. Are you able to do the CSL Flap test?

    Leave a comment:


  • 0-60motorsports
    replied
    Originally posted by karter16 View Post
    Version 1.2 is now available and supports the following diagnostic functions:
    • CSL Snorkel Flap test
    • DMTL Leakage test
    • E-Box Fan test
    • Electric Fan PWM test
    • Electronic Throttle Control
    • Fuel Pump Actuation
    • Idle Speed Control
    • Rough Running / Misfire Detection
    • Suction Jet Pump test
    • VANOS test

    Disclaimer: I do not have a CSL snorkel, and I have a Euro car so don't have the DMTL system. The tests are executed in the same way DIS/INPA does, but I'd greatly appreciate someone testing and confirming that these function as they expect.

    The other functions are tested and confirmed to work.

    Second Disclaimer: I'm not actually super familiar with these tests, so if anyone has any ideas about how to better present the data, etc. I'm all ears! (One thing I do think could be a good idea is to have an "amber" region on the VANOS test colour bars that are the tighter, community agreed, metrics that are ideal. the standard ranges ISTA/INPA/DIS assess against for what's "ok" is quite wide)


    Sample screenshots:

    Click image for larger version  Name:	Screenshot 2026-05-30 at 2.28.11 PM.png Views:	5 Size:	74.5 KB ID:	356904

    Click image for larger version  Name:	Screenshot 2026-05-30 at 2.28.21 PM.png Views:	5 Size:	94.0 KB ID:	356905
    That is so cool! Thank you.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • ac427
    replied
    Originally posted by karter16 View Post
    Version 1.2 is now available and supports the following diagnostic functions:
    • CSL Snorkel Flap test
    • DMTL Leakage test
    • E-Box Fan test
    • Electric Fan PWM test
    • Electronic Throttle Control
    • Fuel Pump Actuation
    • Idle Speed Control
    • Rough Running / Misfire Detection
    • Suction Jet Pump test
    • VANOS test

    Disclaimer: I do not have a CSL snorkel, and I have a Euro car so don't have the DMTL system. The tests are executed in the same way DIS/INPA does, but I'd greatly appreciate someone testing and confirming that these function as they expect.

    The other functions are tested and confirmed to work.

    Second Disclaimer: I'm not actually super familiar with these tests, so if anyone has any ideas about how to better present the data, etc. I'm all ears! (One thing I do think could be a good idea is to have an "amber" region on the VANOS test colour bars that are the tighter, community agreed, metrics that are ideal. the standard ranges ISTA/INPA/DIS assess against for what's "ok" is quite wide)
    Thank you for the tests. Unfortunately i do not have the wiring in for the CSL Flap test.

    I am running one of Anri's 70°C thermostats. So even after some spirited driving, the motor temperature once i had parked on the driveway was an annoying 79°C, just below the VANOS test's 80°C threshold. So i turned the A/C on and performed an engine fan test at 10% for a little while to raise the engine temperature.

    Would it be possible to display TMOT in the Engine Fan Test?

    I did think about requesting a temp override for the VANOS test but that would skew the community's VANOS test results.

    The VANOS test amber zone sounds like a great idea.


    Are the test results recorded in any of the logs?
    Last edited by ac427; 05-30-2026, 06:43 AM.

    Leave a comment:


  • karter16
    replied
    Version 1.2 is now available and supports the following diagnostic functions:
    • CSL Snorkel Flap test
    • DMTL Leakage test
    • E-Box Fan test
    • Electric Fan PWM test
    • Electronic Throttle Control
    • Fuel Pump Actuation
    • Idle Speed Control
    • Rough Running / Misfire Detection
    • Suction Jet Pump test
    • VANOS test

    Disclaimer: I do not have a CSL snorkel, and I have a Euro car so don't have the DMTL system. The tests are executed in the same way DIS/INPA does, but I'd greatly appreciate someone testing and confirming that these function as they expect.

    The other functions are tested and confirmed to work.

    Second Disclaimer: I'm not actually super familiar with these tests, so if anyone has any ideas about how to better present the data, etc. I'm all ears! (One thing I do think could be a good idea is to have an "amber" region on the VANOS test colour bars that are the tighter, community agreed, metrics that are ideal. the standard ranges ISTA/INPA/DIS assess against for what's "ok" is quite wide)


    Sample screenshots:

    Click image for larger version  Name:	Screenshot 2026-05-30 at 2.28.11 PM.png Views:	5 Size:	74.5 KB ID:	356904

    Click image for larger version  Name:	Screenshot 2026-05-30 at 2.28.21 PM.png Views:	5 Size:	94.0 KB ID:	356905
    Last edited by karter16; 05-29-2026, 07:35 PM.

    Leave a comment:

Working...
X