Brembo GT Kit and CSL/ZCP Wheels fitment question

[Obioban]

Does Brembo currently made a 4-pot for our cars?

IND has a set listed, but it's the old F50 calipers... I don't think that's a current kit?

Don't kmow.

Certainly 18 years ago, when I bought my 355/4 brembo GT kit, they did :P

[9kracing]

Does Brembo currently made a 4-pot for our cars?

IND has a set listed, but it's the old F50 calipers... I don't think that's a current kit?

[Obioban]

If you get into tracking, you’ll regret having got with 380s over 355s.

…. And regret getting 6 piston over 4 pistons, for that matter.

[CarbonBlkM3]

380mm GT Kit

4-pot or 6-pot? Be mindful you actually have more clearance with the 6-piston over the 4-piston calipers because of the more streamlined monoblock design. You're going to need to run spacers up front regardless with which you go with when running ZCP wheels up front.

[maximus5403]

https://www.youtube.com/watch?v=tZY4CUACl04

[maximus5403]

Sounds like he's not obsessed with functionality.

PSI is handling my install so I will see what they say. I've never run spacers on any car before as I would just change the wheels, but I prefer the stock CSL/ZCP wheels on the E46.

[Obioban]

Obsessed Garages new video he said he is using 25mm spacer front and 15mm spacer rear.

Sounds like he's not obsessed with functionality.

[maximus5403]

Do you have a link to this? I just see a video about a supercar garage as the latest.

I was hoping no spacers but apparently that's not possible.

https://youtu.be/n1fb5XjDFH0?si=njnBpuZroV9BF7YU

[George Hill]

Obsessed Garages new video he said he is using 25mm spacer front and 15mm spacer rear.

Do you have a link to this? I just see a video about a supercar garage as the latest.

[George Hill]

Ah, ok, yes. I thought you were trying to run these without spacers.

[maximus5403]

Obsessed Garages new video he said he is using 25mm spacer front and 15mm spacer rear.

[George Hill]

380mm GT Kit

Whoa, looking to see how these turn out. The template says this kit hits the spokes AND the barrel on the 8" front ZCP wheel without a spacer.

Please keep us posted as my client would love to make this work for his setup.

[maximus5403]

What kit did you buy?

380mm GT Kit

[Mike RT4]

The CSL wheels are 8.5J and a friend has this brake kit on his CSL with the usual 12mm spacers to fill out the arches . See here: https://www.instagram.com/p/Cz09H_zK...HH0pD21FUVsM0/

He reckons that you could get away with probably 8mm (but 12mm looks so much better anyway).

The ZHP wheels are 8J and would 100% need much bigger spacers, I'd guess at probably 20mm, as the standard CSL wheels accomodate the AP 355 6-pot kit using the narrow body CP5570 calliper without a spacer, where the ZHP wheels require a 15mm spacer to accomodate these alone, so they stand no chance with the much wider Brembo calliper without a significant step up in spacer size.

[George Hill]

I am still waiting on my Brembo GT kit to arrive. I saw Obsessed Garage just installed his kit but he hasn't released the video yet so I can see what spacer he used.

What kit did you buy?