Can a mod update the original post or the linked file. People are still referring to the version linked there from April 2016. The April 2020 version has about 20 more pages of info and some items fixed up.
This is the correct one IMO:
Announcement
Collapse
No announcement yet.
e46 M3 torque spec thread-- every bolt on the car on diagrams
Collapse
This is a sticky topic.
X
X
-
Magnificent - one of the most helpful forum posts I've ever seen.Originally posted by Obioban View Post
(I've only got a 325i, but still...)
Leave a comment:
-
Just following up on the previous post in this thread - does anyone know the correct torque for the thrust bearing : cylinder head. It’s for the five 8.8 M8 bolts.
Leave a comment:
-
Anyone know the torque spec for the thrust bearing flange to the cylinder head? There's a good chance I'm blind and missed it, but I didn't seem to find it in the file
Leave a comment:
-
Great write up. I wanted to add that racing Diffs has different differential pinion preload and carrier backlash specs than what is given by TIS and metric mechanics.
pinion preload: 0.5-0.8 NM
careier backlash: 0.1-0.15 mm
I actually didn’t find any differential build specs in TIS and I checked MM’s diff booklet and those specs were listed generically, I’m not sure if they apply to all the diffs they build.
Leave a comment:
-
Thread dig but I thought I'd confirm this as I was checking up a few. TIS agrees with the diagram. Should be 100Nm / 74 ft-lbOriginally posted by oceansize View PostIs the torque value for number 3 in this picture correct? I don't remember have any struggles removing these bolts and 74 ft/lbs is high. I tightened them to 59 so if I was wrong I need to retorque.E36 / Z3 2.8i, E36 / S50 / S52 / S54, E46 / S54, E85 / S54, E86 / S54 M10x46 10.9 (black) Replace screws 100 Nm Last edited by Shonky; 02-13-2021, 02:31 AM.
Leave a comment:
-
Thank you for this as well, although I have a Bentley Hard Cover, this seems to have all the specs in an easier to find/look @ format
Leave a comment:
-
-
Can we host the updated version of the file here, in case that site goes down... we all know that is possible :-)Originally posted by Obioban View Post
Leave a comment:
-
Woohoo! Thank you so much for posting that first link! I am working on the power steering lines and that diagram really makes it simple and easy to find the torque values.
Leave a comment:
-
Weird. Works fine for me with the link in my post: (see first post)Originally posted by ac427 View Post
Your link shows the file as being in your 'trash folder' are you sharing a different version?Last edited by heinzboehmer; 01-18-2023, 09:35 AM.
Leave a comment:



Leave a comment: