The "Post Your Wheel Setup" Thread

[Tonggi]

Want to add my setup specs

18x10 ET24 2" lips
18x10.5 ET 22 2.5' lips

no spacers. Kiser.mt Im surprised you are not rubbing in the rear! Beautiful car!

[Kiser.mt]

Motorsport BBS E88 18x10 +21.5mm (15mm spacer rear) with 265/35

[Tonggi]

Finally proud to post up my wheel set.

BBS E88
Front 18x10 2" Lips
Rear 18x10.5 2.5" Lips

Michelin PS4 265/35/18 and 275/35/18

IG: @Supertonggi for cars and dog content

[csollerbrant]

Looks so good on both. What seats are those? They look kind of like 996 GT3 seats.

Good eye! They are 996 GT3 replicas I got for cheap from a buddy of mine. I have since fitted a Recaro SPG drivers and I am going to fit an SPG to the passenger side this winter

[Mystic3]

Apex EC-7
18 9.5

[dHam_Slow.46M]

dHam_Slow.46M camber doesn't effect clearance at the strut since you're just moving the position of the top mount, strut clearance should all stay pretty constant.

Ah I see! Thanks for the clafication!

Checking it out a little more this morning, I noticed there's more room on the driver side than there is on the pass. side; Would touching anything on the alignment help solve this issue?

[Thoglan]

dHam_Slow.46M camber doesn't effect clearance at the strut since you're just moving the position of the top mount, strut clearance should all stay pretty constant.

[dHam_Slow.46M]

Picked these up yesterday and already had a set of tires waiting for me.
Apex FL-5 18x10 et25 square
Bridgestone Potenza Sport 265/35/18

Oddly enough, I had to add 3mm spacers upfront as the tires were hitting the struts even with -3.2 camber.🤷♂️

[Nate047]

*everyone with ARC-8s*

[jet_dogg]

Haha, hung up my jdm crown decades ago. Can't believe someone put reps on an m3...well actually I can.

[Nate047]

The rota slipstream has plagued the Honda community for decades lmao

[jet_dogg]

Didn't know they made fake regas haha.

[Nate047]

Very unique - never seen these before

They're Desmond Reagamaster reps

[Nate047]

Re's are 18x9.5+25 with 265/35 square, no spacers. Nankang AR1
Ch's are 19x8.5+20 and 19x10+20 with 235/35 and 265/30, no spacers. Michelin PS4S

ST XTA coilovers, roughly -3 camber front and -2.4 rear.

Looks so good on both. What seats are those? They look kind of like 996 GT3 seats.

[csollerbrant]

Looks amazing. Additional detail on wheels and suspension?

Re's are 18x9.5+25 with 265/35 square, no spacers. Nankang AR1
Ch's are 19x8.5+20 and 19x10+20 with 235/35 and 265/30, no spacers. Michelin PS4S

ST XTA coilovers, roughly -3 camber front and -2.4 rear.