The "Post Your Wheel Setup" Thread

[sc_tr0jan_m3]

looking for ideas... getting some body work done to the track car and looking at 18x11's all around. other than the flow APEX wheels, does anyone else know of other manufacturers that make wheels that'll fit with minimal spacers?

[Fresh6390]

Rays ZE40s 18x9.5 et 22
265 35 18 Yokohama Advan

[Andy2424]

Wow, very clean car

[mtech9]

OEM 19s (PSS)
CSL spec (PS4S)

[daxbox]

APEX PS-7, 18x9.5 ET33, 275/35

[Lip]

Arc-8 Gloss black 18x10 with 275/35 Square setup


Sent from my iPhone using Tapatalk

Best all-black setup I’ve seen in a while

[Lip]

Whats the offsets on the e88?

I forget. But somewhere between +22 and +25 front and rear


Sent from my iPhone using Tapatalk

[akshon]

BBS E88





Fikse FM-10

Whats the offsets on the e88?

[E30darkknight]

Arc-8 Gloss black 18x10 with 275/35 Square setup


Sent from my iPhone using Tapatalk

[binary]

You should be able to fit them with stock specs. Before I got coils/camber plates, I was at -1.7 degrees camber and it was fine 👍🏼


Sent from my iPhone using Tapatalk

thanks! I was going by the Apex wheel fitment guide which states:

Front & Rear: 18x9.5” ET28 with 265/35-18 tires or 275/35-18

• 265/35-18 requires at least -2.5 degrees of front camber.

And I don't think I can get -2.5 degrees of camber without plates.

[cakM3]

Wheels: BBS CH 19" Bright Silver Finish
Front: 19X8.5 ET35 (CH004)
Rear: 19x10 ET20 (CH017)

Tires: Hankook Ventus V12 Evo 2
Front: 245/35 R19
Rear: 275/30 R19

[Tbonem3]

What valve stem are you using?

No idea, just typical black rubber.

[VaruzhM3]

TE37’s

[I M Legend]

Hmm I guess I never posted my new set

OE CSL w/ 235/265 MPS4s

15mm front, 5mm rear spacer (10mm will just kiss at the rear, so I have to dial out the toe-in)

What valve stem are you using?

[DESMDR3]

What camber settings do you need to run for ET28? Did you need or do you have camber plates? I am researching TE37s and trying to figure out what I need to make them fit.

You should be able to fit them with stock specs. Before I got coils/camber plates, I was at -1.7 degrees camber and it was fine 👍🏼


Sent from my iPhone using Tapatalk