The "Post Your Wheel Setup" Thread

[mtech9]

OEM 19s (PSS)
CSL spec (PS4S)

[daxbox]

APEX PS-7, 18x9.5 ET33, 275/35

[Lip]

Arc-8 Gloss black 18x10 with 275/35 Square setup


Sent from my iPhone using Tapatalk

Best all-black setup I’ve seen in a while

[Lip]

Whats the offsets on the e88?

I forget. But somewhere between +22 and +25 front and rear


Sent from my iPhone using Tapatalk

[akshon]

BBS E88





Fikse FM-10

Whats the offsets on the e88?

[E30darkknight]

Arc-8 Gloss black 18x10 with 275/35 Square setup


Sent from my iPhone using Tapatalk

[binary]

You should be able to fit them with stock specs. Before I got coils/camber plates, I was at -1.7 degrees camber and it was fine 👍🏼


Sent from my iPhone using Tapatalk

thanks! I was going by the Apex wheel fitment guide which states:

Front & Rear: 18x9.5” ET28 with 265/35-18 tires or 275/35-18

• 265/35-18 requires at least -2.5 degrees of front camber.

And I don't think I can get -2.5 degrees of camber without plates.

[cakM3]

Wheels: BBS CH 19" Bright Silver Finish
Front: 19X8.5 ET35 (CH004)
Rear: 19x10 ET20 (CH017)

Tires: Hankook Ventus V12 Evo 2
Front: 245/35 R19
Rear: 275/30 R19

[Tbonem3]

What valve stem are you using?

No idea, just typical black rubber.

[VaruzhM3]

TE37’s

[I M Legend]

Hmm I guess I never posted my new set

OE CSL w/ 235/265 MPS4s

15mm front, 5mm rear spacer (10mm will just kiss at the rear, so I have to dial out the toe-in)

What valve stem are you using?

[DESMDR3]

What camber settings do you need to run for ET28? Did you need or do you have camber plates? I am researching TE37s and trying to figure out what I need to make them fit.

You should be able to fit them with stock specs. Before I got coils/camber plates, I was at -1.7 degrees camber and it was fine 👍🏼


Sent from my iPhone using Tapatalk

[Lip]

BBS E88





Fikse FM-10

[liam821]

Here are a few of my car...

CSL/ZCP 19" reps 19x8.5 +44 245 front and 18x9.5 +27 265 rear with a 12mm front spacer




Work Emotion T7R 18x9.5 +12 235/35 and 18x10.5" +12 275/30 in the rear. No spacer needed obvs, super-aggressive fitment.




Rays Gram Lights 57CR 18x9.5 +38 265/35 square. 12mm spacer front and rear. I ordered a larger rear spacer to push the rear out a bit more and a smaller front to remove some poke. Don't think I can go much less than a 10mm front spacer because the tire will rub on my suspensions height adjustable coil mount - if I dropped to a 6" spring instead of a 7" spring would give me another 10-15mm of space.






Not sure I'm 100% sold on my Gram Lights yet - I really like the color and wheel design though, plus they're really light. I think an 18x10 +22 rear would look better/fit better than the 9.5 +38 for sure but it would be a custom order from Rays. We'll see how much I like the style and perhaps I'll order a custom rear set.

[Tbonem3]

Hmm I guess I never posted my new set

OE CSL w/ 235/265 MPS4s

15mm front, 5mm rear spacer (10mm will just kiss at the rear, so I have to dial out the toe-in)