996s
Front wheel is 9"et31. My 9"et30 arc8 needed a 5mm spacer minimum fwiw.
Announcement
Collapse
No announcement yet.
The "Post Your Wheel Setup" Thread
Collapse
X
-
Looks great, really does.Originally posted by nextelbuddy View PostStock e9x ZCP 359M wheels.
19x9 - 245/35/19
19x10 - 265/35/19
My dude was so excited when he turned 16 and then he got a Hyundai (6 speed manual of course), lol. He is 18 now and when home from college we take turns driving the back roads in the sunshine, the best of times.
- Likes 1
Leave a comment:
-
Stock e9x ZCP 359M wheels.
19x9 - 245/35/19
19x10 - 265/35/19
1 Photo
- Likes 4
Leave a comment:
-
Did you use any concentric hub? The wheel bore and our wheel hub size are differentOriginally posted by liam821 View PostHere are a few of my car...
Rays Gram Lights 57CR 18x9.5 +38 265/35 square. 12mm spacer front and rear. I ordered a larger rear spacer to push the rear out a bit more and a smaller front to remove some poke. Don't think I can go much less than a 10mm front spacer because the tire will rub on my suspensions height adjustable coil mount - if I dropped to a 6" spring instead of a 7" spring would give me another 10-15mm of space.

Leave a comment:
-
Thank you, I'm happy with them. I am running stock calipers with PFC08 pads for now. It looks like I have clearance to run BBK though. I plan on going with the Brembo Pista kit eventually.Originally posted by T-Rex View Post
Car looks fantastic on E88s. Are you running a BBK up front? If so, how's the clearance on the ET25s?
Leave a comment:
-
Sure, it’s a hamann rep:Originally posted by Albino09 View Post
Do you have a zoomed-out rear 3/4 view? Would love to get a look at that spoiler on an LSB, I've been wanting one for mine.


Sent from my iPhone using Tapatalk
- Likes 2
Leave a comment:
-
race pocket BBS E88, 18x10 +25, 10mm spacer in the rear



Last edited by Gearhead55; 08-31-2022, 02:09 PM.
- Likes 2
Leave a comment:
-


Something a little different-
HRE 449R… found local in need of TLC. I don’t love them but refurbishing was a fun project.
19x9 et38 front and 19x10 et28 rear
Sent from my iPhone using Tapatalk
- Likes 2
Leave a comment:
-



Enkei Nt03’s 18x10 square
12mm spacer in the back
Sent from my iPhone using Tapatalk
- Likes 5
Leave a comment:
-
BBS LM 19x8.5 and 19x9.5, with Firehawks Indy 500 235/35R19 265/30R192 Photos
- Likes 3
Leave a comment:

Leave a comment: